Re: Running a BOSS on single phase
Posted by
ballendo
on 2005-04-19 15:42:30 UTC
Hello,
I've always used 1800's (up to 20HP, for a 15HP motor on a widebelt
sander.)
I'd use a 5HP,1800 rpm to make a converter for the BP spindle.
Would be interesting to hear why he's suggesting 3600...
Ballendo
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Polaraligned"
<polaraligned@o...> wrote:
I've always used 1800's (up to 20HP, for a 15HP motor on a widebelt
sander.)
I'd use a 5HP,1800 rpm to make a converter for the BP spindle.
Would be interesting to hear why he's suggesting 3600...
Ballendo
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Polaraligned"
<polaraligned@o...> wrote:
>on e-
>
> >
> > Check e-bay and the local scrap yards. I found 3 phase motors
> > bay to be really cheap and I trip over them at the scrap yard.
> >
> > Dave
>
> A motor rewinder I talked to said that 3600 RPM is the desired
> rated speed for a converter. Any truth to this?
> And what horsepower rating should I get to run a BOSS 2HP mill?
>
> Thanks,
> Scott
Discussion Thread
Polaraligned
2005-04-18 13:55:10 UTC
Running a BOSS on single phase
Doug Fortune
2005-04-18 15:20:18 UTC
Re: Running a BOSS on single phase
Jon Elson
2005-04-18 19:39:19 UTC
Re: [CAD_CAM_EDM_DRO] Running a BOSS on single phase
Jon Elson
2005-04-18 19:42:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Running a BOSS on single phase
JanRwl@A...
2005-04-18 21:25:50 UTC
Re: [CAD_CAM_EDM_DRO] Running a BOSS on single phase
Polaraligned
2005-04-19 02:52:37 UTC
Re: Running a BOSS on single phase
Polaraligned
2005-04-19 04:10:34 UTC
Re: Running a BOSS on single phase
Jon Elson
2005-04-19 09:07:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Running a BOSS on single phase
Jon Elson
2005-04-19 09:09:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Running a BOSS on single phase
turbulatordude
2005-04-19 09:55:02 UTC
Re: Running a BOSS on single phase
Polaraligned
2005-04-19 11:41:23 UTC
Re: Running a BOSS on single phase
cnc002@a...
2005-04-19 12:58:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Running a BOSS on single phase
ballendo
2005-04-19 15:42:30 UTC
Re: Running a BOSS on single phase
cnc002@a...
2005-04-20 18:05:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Running a BOSS on single phase
cnc_4_me
2005-04-20 21:00:55 UTC
Re: Running a BOSS on single phase
Doug Fortune
2005-04-20 22:42:25 UTC
Haas mini "Office Lathe" and mini "Office Mill"
Les Newell
2005-04-20 23:38:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Running a BOSS on single phase
Polaraligned
2005-04-21 04:10:22 UTC
Re: Running a BOSS on single phase
washcomp
2005-04-21 04:21:58 UTC
Re: Running a BOSS on single phase
Les Newell
2005-04-21 06:51:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Running a BOSS on single phase
Doug Fortune
2005-04-21 08:29:35 UTC
Re: Running a BOSS on single phase
vavaroutsos
2005-04-21 15:39:39 UTC
Re: Running a BOSS on single phase
Polaraligned
2005-04-22 04:25:55 UTC
Anyone Convert BOSS to servo's?
Les Newell
2005-04-22 05:19:44 UTC
Re: [CAD_CAM_EDM_DRO] Anyone Convert BOSS to servo's?
Polaraligned
2005-04-22 15:56:47 UTC
Re: Anyone Convert BOSS to servo's?
Les Newell
2005-04-25 01:19:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Anyone Convert BOSS to servo's?
Polaraligned
2005-04-26 03:40:52 UTC
BOSS to servo's and reduction
R Rogers
2005-04-26 06:16:18 UTC
Re: [CAD_CAM_EDM_DRO] BOSS to servo's and reduction
Polaraligned
2005-04-26 17:59:51 UTC
Re: BOSS to servo's and reduction
R Rogers
2005-04-26 19:00:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: BOSS to servo's and reduction
Les Newell
2005-04-27 02:05:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: BOSS to servo's and reduction
Polaraligned
2005-04-27 05:47:59 UTC
Re: BOSS to servo's and reduction
R Rogers
2005-04-27 06:54:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: BOSS to servo's and reduction
Polaraligned
2005-04-27 10:46:14 UTC
Re: BOSS to servo's and reduction