Re: [CAD_CAM_EDM_DRO] Re: Printer Port Voltage Problem. neeeed help

You will need the System or better still the motherboard manual
to check this but, some motherboards have a second unused
parallel port and connector on them.

This will however mean you will have to change all the port I/O addresses
and I dont know if your software will let you do that.

Also some systems will let you plug an I/O port card into one of the
motherboard slots or your port may already be there, if so it's just a
case of changing this card.

Dave M.

----- Original Message -----
From: "shadi_salhab_78" <salhab@...>

Hi,

I found that the real problem is in my PC , the parallel port s
damaged since the voltag is constant is the same pins every time ,
and won't change when restart the Pc or start the mach2 , is there a
way to install another parallel port on the PC or should I change
the Mathorboard?



--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.8/37 - Release Date: 01/07/2005