CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives - wire breakage

Posted by Jon Elson
on 2006-01-08 15:47:04 UTC
turbulatordude wrote:

>Most of us use some sort of good wire wherever there is wire movement.
> Motion control wire is highly desired.
>
>However, regardless, the wires can suffer repetitive motion syndrome.
>
>If the machine has been in use for any length of time, that is
>definitely a candidate for inspection.
>
>And, that leads me to a question. Ya-know those flat ribbon cables
>the printers use ? seems dot-matrix and well as ink-jet use similar
>flat cables.
>
>Where can one find those, and what does one look for in that type of
>wire ?
>
>
If you look in the Digi-Key catalog under ribbon cable, they have something
they call "ultra-flex" I think. it is made with finer and more numerous
wire
strands, and an insulation that accepts the increased flexing. You need to
clamp the ends so that the flexing doesn't reach the connectors.

This stuff has VERY thin wires, about #30 AWG, I think. Standard ribbon
cable is #26. Either is pretty inadequate for motor wiring. It would be
fine for encoder and limit switch uses, though.

Jon

Discussion Thread

wanliker@a... 2006-01-06 19:20:39 UTC MAGIC SMOKE Xylotex drives R Rogers 2006-01-06 20:55:17 UTC Re: [CAD_CAM_EDM_DRO] MAGIC SMOKE Xylotex drives wanliker@a... 2006-01-06 21:01:17 UTC Re: [CAD_CAM_EDM_DRO] MAGIC SMOKE Xylotex drives caudlet 2006-01-06 23:04:46 UTC Re: MAGIC SMOKE Xylotex drives turbulatordude 2006-01-07 08:05:17 UTC Re: MAGIC SMOKE Xylotex drives Jymmm 2006-01-07 09:09:40 UTC Re: MAGIC SMOKE Xylotex drives John Johnson 2006-01-07 11:02:26 UTC Re: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives Vlad Krupin 2006-01-07 12:20:18 UTC Re: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives Andy Wander 2006-01-07 12:37:27 UTC RE: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives wanliker@a... 2006-01-07 17:06:38 UTC Re: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives wanliker@a... 2006-01-07 17:07:28 UTC Re: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives John Johnson 2006-01-08 07:26:13 UTC Re: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives John Johnson 2006-01-08 07:29:03 UTC Re: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives Darren Lucke 2006-01-08 10:18:54 UTC Re: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives turbulatordude 2006-01-08 10:40:24 UTC Re: MAGIC SMOKE Xylotex drives AVGAS is OFF TOPIC turbulatordude 2006-01-08 11:07:00 UTC Re: MAGIC SMOKE Xylotex drives - wire breakage Jon Elson 2006-01-08 15:47:04 UTC Re: [CAD_CAM_EDM_DRO] Re: MAGIC SMOKE Xylotex drives - wire breakage