CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Prox switches

Posted by Paul Kelly
on 2006-03-03 15:59:02 UTC
Yep, I've been told that accuracy is improved by mounting them perpendicular
to the axis, so that the flag comes in from the side rather than moves
towards the sensor along its axis.
Here's the results of some tests I did:

http://www.caswa.com/homing.wmv

PK

> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Irby Jones
> Sent: Saturday, 4 March 2006 2:34 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: Prox switches
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "jerryflyguy" <hjjohnson@...>
> wrote:
> <snip>
> > If a 2mm is better, would a 1mm barrel type be even better?? How
> > accurate should a person expect one of these type sensor's to be?
> > Can I consistantly stop my gantry w/in 0.010"???
>
>
> Jarrett,
>
> Paul Kelly talked about the accuracy of prox switches here last fall.
> See message #84377. Or search for "Limit switches revisited" and look
> at the messages around November, 2005. Hope that helps some.
>
> Irby
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be a sister site to the CCED group, as many of the
> same members are there, for OT subjects, that are not allowed
> on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Discussion Thread

jerryflyguy 2006-03-03 08:31:53 UTC Prox switches Robert Campbell 2006-03-03 08:48:16 UTC Re: [CAD_CAM_EDM_DRO] Prox switches jerryflyguy 2006-03-03 09:18:41 UTC Re: Prox switches Robert Campbell 2006-03-03 09:29:20 UTC Re: [CAD_CAM_EDM_DRO] Re: Prox switches Irby Jones 2006-03-03 10:34:34 UTC Re: Prox switches Paul Kelly 2006-03-03 15:59:02 UTC RE: [CAD_CAM_EDM_DRO] Re: Prox switches Jarrett & Heidi Johnson 2006-03-03 17:17:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Prox switches Jarrett & Heidi Johnson 2006-03-03 17:18:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Prox switches Paul Kelly 2006-03-03 17:46:59 UTC RE: [CAD_CAM_EDM_DRO] Re: Prox switches cnc002@a... 2006-03-04 06:22:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Prox switches cnc002@a... 2006-03-04 06:29:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Prox switches Paul Kelly 2006-03-04 06:35:59 UTC RE: [CAD_CAM_EDM_DRO] Re: Prox switches Jim Peck 2006-03-04 08:33:33 UTC End of Travel limit switches. Vlad Krupin 2006-03-05 22:35:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Prox switches Jarrett & Heidi Johnson 2006-07-04 22:53:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Prox switches Paul Kelly 2006-07-05 05:36:40 UTC RE: [CAD_CAM_EDM_DRO] Re: Prox switches Heidi Johnson 2006-07-05 10:16:50 UTC Re: RE: [CAD_CAM_EDM_DRO] Re: Prox switches Paul Kelly 2006-07-05 16:05:14 UTC RE: RE: [CAD_CAM_EDM_DRO] Re: Prox switches Jarrett & Heidi Johnson 2006-07-10 17:34:54 UTC Re: RE: [CAD_CAM_EDM_DRO] Re: Prox switches tech@c... 2006-07-10 19:13:19 UTC RE: [CAD_CAM_EDM_DRO] Re: Prox switches Jarrett & Heidi Johnson 2006-07-10 23:40:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Prox switches