Re: [CAD_CAM_EDM_DRO] chinese dro scale shorting dro display?

hi klaus-

thanks - i was going to do that as a last resort. is this common?

i'm trying to get my head around why this is happening in the first
place..

david

On Thu, 3 Aug 2006, Klaus Pack wrote:

> Hi David....
>
> just for this reason some scale brands have a insulation kit coming with the scale.
> If you dont have one simply get one from the electronic parts store.
> a thin layer off plastic with some little plastic sleeves for the screws like they use for the Transistors.
> Plastic screws and a plastic washer will do the trick also.
>
> good luck
> Klaus
>
> figNoggle <david@...> wrote:
>
>
> hi again-
>
> quick update. sure enough, there's approx. 5VDC between the scale and
> saddle. any ideas how to deal with this?
>
> a more updated account with pictures to show what's going on:
> <http://www.fignoggle.com/workshop/item/2006/8/3/8x12-cnc-project-installing-dro-scales-part-2-shocking>
>
> thanks!
>
> david
>
> CNC Plans <http://www.fignoggle.com/plans/cncplans.htm> (DRO too)
> Sieg X3 and Super X3 Mill Information <http://www.superx3.com>
>
> On Thu, 3 Aug 2006, figNoggle wrote:
>
> >
> >
> > hi all-
> >
> > i've run into an interesting problem with the chinese dro scales/displays:
> >
> > i recently mounted a dro scale to a 8x12 lathe. initially the display
> > itself (a cheap shars unit) seemed to work fine, then it just all of a
> > sudden went dim. after checking connections, cables, cleaning the scale,
> > etc.. it appears that the problem is an electrical one. i found
> > this out by disconnecting one part of the scale where the display unit is
> > mounted to the saddle and noticing a very small spark from the tip of the
> > screw as i touch it to the hole in the saddle.
> >
> > if i unplug any part of the chain, the display unit lights back up to
> > normal. the moment the lathe or any part of the display > cable > dro
> > scale is connected to power simultaneously the display dims again.
> >
> > i'll be checking with a voltmeter today to see if i'm shorting or what,
> > but can you see what's going on here?
> >
> > the blog entry which describes this somewhat:
> > <http://www.fignoggle.com/workshop/item/2006/8/2/8x12-cnc-project-installing-dro-scales>
> >
> > the actual picture. note that the scale display unit is not connected to
> > the saddle.
> > <http://www.fignoggle.com/workshop/media/8x12/figNoggle_8x12DROZ.jpg>
> >
> > thanks for your help!
> >
> > david
> >
> >
> > (NEW!) MetalWorkingFAQ.NET <http://www.metalworkingfaq.net>
> > ACME Screw & Acetal/Delrin Kit <http://www.fignoggle.com/kits/acmekit.htm>
> > CNC Plans <http://www.fignoggle.com/plans/cncplans.htm> (DRO too)
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> > Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
>
>
>
>
> ---------------------------------
> Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>