Re: [CAD_CAM_EDM_DRO] milling circuit boards

Sorry, this isn't an answer, but another question. I think I've read
posts from 2 or 3 people milling circuit boards, or trying to. What's
the cost breakdown? Is it really and truly cheaper to make these
boards after you factor in your time and amortize your equipment?

You can get some pretty good prototype quantity boards from internet
outfits like PCB123 now for very cheap, and if you're running
production, there are plenty of board shops out there all undercutting
each other. Check out the back section of any of the EE mags for a
long list of them.

Even 10 years ago "breadboard" meant giving a hand-drawn circuit to a
tech to solder together with perfboard. Today it means doing a quickie
in Eagle and sending it out to an overnight proto house. It's cheaper
than paying the tech.

So where's the upside? Why bother building a machine for it? (serious
question, not sniping)

This is probably off topic, so feel free to email me directly.

TIP: you always pay for one panel, so lay-up several different ones in
the gerbers. If you have space, there are a bunch of free patterns for
proto-boards available to fill it in.

On 10/5/06, wdavis364 <wdavis@...> wrote:
> Shopping around for a router, Some router have 1/4 collets and some
> have 1/4 collets and 1/8 collets. Not knowing much about this, what
> size collet will I would most likely to be using in milling circuit
> boards. Will 1/4 collets handle the very small size drill bits(1/32)?
> Thanks for any advice on this.
> bill
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for OT
> subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>