Re: [CAD_CAM_EDM_DRO] Re: milling circuit boards

Thanks Dave, I've found some routers I liked but they did not list 1/8
collets, only 1/4. They are others that both 1/4 and 1/8 collets. I'll see
if I can find one of these I like.
Thanks
bill

----- Original Message -----
From: "turbulatordude" <dave_mucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, October 05, 2006 9:01 PM
Subject: [CAD_CAM_EDM_DRO] Re: milling circuit boards


> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "wdavis364" <wdavis@...> wrote:
>>
>> Shopping around for a router, Some router have 1/4 collets and some
>> have 1/4 collets and 1/8 collets. Not knowing much about this, what
>> size collet will I would most likely to be using in milling circuit
>> boards. Will 1/4 collets handle the very small size drill bits(1/32)?
>> Thanks for any advice on this.
>> bill
>
> the standard drill diameter for PCB work is 1/8" dia. Therefore, to
> answer your quesiton, 1/8"
>
> You can buy drill bits on E-bay for about 50 cents each, in lots of
> 25. Go for the guys who will tell you up-front what diameter drills
> you will get.
>
> I bougth a cheap set and 45 pieces were 13 thou or less. Totally
> unusable for my needs.
>
> Dave
>
>
>>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>