Re: [CAD_CAM_EDM_DRO] milling circuit boards

----- Original Message -----
From: "KM6VV" <KM6VV@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, October 06, 2006 9:39 AM
Subject: RE: [CAD_CAM_EDM_DRO] milling circuit boards


> Hi Bill,
>
> The endmills you'll want to use for PCB milling are tiny! You'll want the
> 1/8" size.
>
> Check out Eagle and PCB-GCODE lists. I just milled a 2nd TDOA RDF board
> (Time Delay of Arrival, Radio Direction Finding) as a possible project for
> a
> Ham Radio club my wife and I belong to.
>
> Look at the DeWalt DW760 router with a 1/8" collet adapter.
>
> Alan KM6VV
>
>> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of wdavis364
>>
>> Shopping around for a router, Some router have 1/4 collets and some
>> have 1/4 collets and 1/8 collets. Not knowing much about this, what
>> size collet will I would most likely to be using in milling circuit
>> boards. Will 1/4 collets handle the very small size drill bits(1/32)?
>> Thanks for any advice on this.
>> bill
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>