CAD CAM EDM DRO - Yahoo Group Archive

Re: 6 axis ARCNC100 CNC board with constant contouring turned on

Posted by atelierrobin
on 2006-12-14 08:07:48 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "lcdpublishing"
<lcdpublishing@...> wrote:
>
> Very cool system.
>
> How do you interface some of the basic CNC controls like:
> Single block
> Optional Stop
> Cycle start
> Feed Hold
> Feed override
> Spindle speed control and overrides
> etc.

The ARCNC100 is not different than other CNC boards in this regard. It
uses digital IO and analog IO. It has:

21 Digital outputs
20 Digital inputs
9 Analog inputs
4 Analog outputs

All those are accessible from the internal 32 bit CPU and auxiliary
PLC co-processor.

It also has the keyboard input that we use in the same way you would
with Mach3 and a PC for example for stop/continue, feed override, etc

Best,

Patrick Robin

Discussion Thread

atelierrobin 2006-12-13 12:43:16 UTC 6 axis ARCNC100 CNC board with constant contouring turned on lcdpublishing 2006-12-13 14:14:36 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-13 18:17:11 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on lcdpublishing 2006-12-14 05:36:58 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on Vince Endter 2006-12-14 06:21:44 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-14 07:56:53 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-14 08:07:48 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on optics22000 2006-12-15 08:43:30 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-15 09:14:47 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on Lester Caine 2006-12-15 09:50:23 UTC Re: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-15 10:13:15 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on Dave Fisher 2006-12-15 11:06:53 UTC RE: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on Lester Caine 2006-12-15 11:20:46 UTC Re: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-15 11:56:10 UTC Re: 6 axis ARCNC100 CNC board with constant contouring turned on optics22000 2006-12-16 17:27:40 UTC NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on atelierrobin 2006-12-17 09:25:34 UTC NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on Lester Caine 2006-12-17 11:29:58 UTC Re: [CAD_CAM_EDM_DRO] NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on Mark Vaughan 2006-12-17 12:10:38 UTC RE: [CAD_CAM_EDM_DRO] NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on