Re: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on

atelierrobin wrote:

> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Lester Caine <lester@...> wrote:
>> atelierrobin wrote:
>>
>>> keyboard, NTSC video screen (standard TV) and various user supplied
>> PAL option later?
>> Or RGB for any monitor?
>
> Pal yes, it requires no hardware mods. Just a firmware modification
> that we will do once we get our hads on a PAL monitor to test. Also
> not sure if this is correct but we were told that most TVs/videos
> monitors sold in Europe are NTSC/PAL compatible. Maybe someone can
> confirm?

ITX board I use for Mach-in-a-box has a PAL/NTSC output, but I have
trouble getting the output to lock up on a TV if I forget to switch the
default to PAL. I think that as long as the output is 625 line PAL or
NTSC is not a problem, but since the NTSC selection also switches to 525
line the cheap small TV's seem to have a problem :(
Modern sets may be less of a problem, but most workshops seem to have
old sets salvaged from the house and borrowing the new one from the
house is not an option ;)
Of cause the LCD panel to be used with Mach-in-a-box is then easier to
justify if the old tele will not work :)

--
Lester Caine - G8HFL
-----------------------------
L.S.Caine Electronic Services - http://home.lsces.co.uk
Model Engineers Digital Workshop -
http://home.lsces.co.uk/ModelEngineersDigitalWorkshop/
Treasurer - Firebird Foundation Inc. - http://www.firebirdsql.org/index.php