Re: 6 axis ARCNC100 CNC board with constant contouring turned on
Posted by
optics22000
on 2006-12-15 08:43:30 UTC
So is it correct to say that the interface could not be tried without
running it on the ARCNC100? Or can it be demo'd on a PC?
regards-
Elliot Burke
--- In CAD_CAM_EDM_DRO@yahoogroups.com,
"atelierrobin" <atelierrobin@...> wrote:
running it on the ARCNC100? Or can it be demo'd on a PC?
regards-
Elliot Burke
--- In CAD_CAM_EDM_DRO@yahoogroups.com,
"atelierrobin" <atelierrobin@...> wrote:
>It
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "lcdpublishing"
> <lcdpublishing@> wrote:
> >
> > Very cool system.
> >
> > How do you interface some of the basic CNC controls like:
> > Single block
> > Optional Stop
> > Cycle start
> > Feed Hold
> > Feed override
> > Spindle speed control and overrides
> > etc.
>
> The ARCNC100 is not different than other CNC boards in this regard.
> uses digital IO and analog IO. It has:etc
>
> 21 Digital outputs
> 20 Digital inputs
> 9 Analog inputs
> 4 Analog outputs
>
> All those are accessible from the internal 32 bit CPU and auxiliary
> PLC co-processor.
>
> It also has the keyboard input that we use in the same way you would
> with Mach3 and a PC for example for stop/continue, feed override,
>
> Best,
>
> Patrick Robin
>
Discussion Thread
atelierrobin
2006-12-13 12:43:16 UTC
6 axis ARCNC100 CNC board with constant contouring turned on
lcdpublishing
2006-12-13 14:14:36 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
atelierrobin
2006-12-13 18:17:11 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
lcdpublishing
2006-12-14 05:36:58 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
Vince Endter
2006-12-14 06:21:44 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
atelierrobin
2006-12-14 07:56:53 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
atelierrobin
2006-12-14 08:07:48 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
optics22000
2006-12-15 08:43:30 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
atelierrobin
2006-12-15 09:14:47 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
Lester Caine
2006-12-15 09:50:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on
atelierrobin
2006-12-15 10:13:15 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
Dave Fisher
2006-12-15 11:06:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on
Lester Caine
2006-12-15 11:20:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: 6 axis ARCNC100 CNC board with constant contouring turned on
atelierrobin
2006-12-15 11:56:10 UTC
Re: 6 axis ARCNC100 CNC board with constant contouring turned on
optics22000
2006-12-16 17:27:40 UTC
NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on
atelierrobin
2006-12-17 09:25:34 UTC
NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on
Lester Caine
2006-12-17 11:29:58 UTC
Re: [CAD_CAM_EDM_DRO] NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on
Mark Vaughan
2006-12-17 12:10:38 UTC
RE: [CAD_CAM_EDM_DRO] NTSC, was Re: 6 axis ARCNC100 CNC board with constant contouring turned on