Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Posted by
Jon Elson
on 2007-03-18 18:09:24 UTC
Mark Vaughan wrote:
medical-grade
filters are designed so that the earth current is extremely low, like
under one mA.
So, almost all the filtering is differential mode, rather than common
mode. That
might defeat the purpose, but it will keep the earth protector from
seeing any
earth current.
Jon
>Trouble is we have no other choice but to use an EMC filter.You might check for a medical-grade filter. At least in the US, the
>
>I have used a lot of Jaguar, Omron and Siemens inverters with and without
>EMC filters, and for me they still tripped a 100mA ELCB with or without the
>filter.
>
>
>
medical-grade
filters are designed so that the earth current is extremely low, like
under one mA.
So, almost all the filtering is differential mode, rather than common
mode. That
might defeat the purpose, but it will keep the earth protector from
seeing any
earth current.
Jon
Discussion Thread
xj5373
2007-03-18 01:09:13 UTC
ELCB Issues
Lester Caine
2007-03-18 01:33:30 UTC
Re: [CAD_CAM_EDM_DRO] ELCB Issues
xj5373
2007-03-18 06:00:17 UTC
Re: ELCB Issues
Lester Caine
2007-03-18 08:24:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Kevin Martin
2007-03-18 09:17:53 UTC
RE: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Wayne Weedon
2007-03-18 11:25:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
xj5373
2007-03-18 12:50:51 UTC
Re: ELCB Issues
Mark Vaughan
2007-03-18 13:09:21 UTC
RE: [CAD_CAM_EDM_DRO] ELCB Issues
xj5373
2007-03-18 13:31:59 UTC
Re: ELCB Issues
Lester Caine
2007-03-18 13:50:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Mark Vaughan
2007-03-18 13:55:14 UTC
RE: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Mark Vaughan
2007-03-18 14:01:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Wayne Weedon
2007-03-18 14:17:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Mark Vaughan
2007-03-18 14:26:01 UTC
RE: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Jon Elson
2007-03-18 18:09:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Steve Blackmore
2007-03-18 18:27:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Harko Schwartz
2007-03-18 20:57:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Lester Caine
2007-03-19 00:09:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Mark Vaughan
2007-03-19 01:07:10 UTC
RE: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Mark Vaughan
2007-03-19 01:13:05 UTC
RE: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Mark Vaughan
2007-03-19 01:20:38 UTC
RE: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Steve Blackmore
2007-03-19 02:32:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
David G. LeVine
2007-03-19 11:23:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Rexarino
2007-03-19 20:37:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: ELCB Issues
xj5373
2007-04-19 11:38:53 UTC
Re: ELCB Issues
Mark Vaughan
2007-04-19 15:19:58 UTC
RE: [CAD_CAM_EDM_DRO] Re: ELCB Issues
Luke1027
2007-04-20 11:51:37 UTC
[CAD_CAM_EDM_DRO] DC Motors Servo Control Servo System Book --> FREE
abdeljalil hasan
2007-04-20 16:37:29 UTC
Re: [CAD_CAM_EDM_DRO] DC Motors Servo Control Servo System Book --> FREE
Luke1027
2007-04-20 18:48:34 UTC
Re: [CAD_CAM_EDM_DRO] DC Motors Servo Control Servo System Book --> FREE