Re: [CAD_CAM_EDM_DRO] automated "labjack"
Posted by
Archie
on 2007-03-28 11:40:19 UTC
It is my understanding that when boards were soldered commercially the
boards were stationary and a wave was created that deposited the solder
on the boards. But what do I know.
archie =) =) =)
Graham Stabler wrote:
boards were stationary and a wave was created that deposited the solder
on the boards. But what do I know.
archie =) =) =)
Graham Stabler wrote:
>[Non-text portions of this message have been removed]
> I've been thinking about an idea related to solder/adhesive dispensing
> on PCBs. The idea requires a short stroke z-axis but it would be much
> better if it the PCB itself could be lifted rather than moving the
> head up and down for various reasons.
>
> Lets say you want to move a pcb up and down by about 3mm or so and
> quickly making sure that it all moves by the same amount. Is
> something like a lab jack the best bet or is there something cleverer?
>
> Graham
>
>
Discussion Thread
Graham Stabler
2007-03-28 03:47:54 UTC
automated "labjack"
R Wink
2007-03-28 04:05:27 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
R Wink
2007-03-28 04:05:27 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
R Wink
2007-03-28 04:07:24 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
R Wink
2007-03-28 04:07:24 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
R Wink
2007-03-28 04:12:57 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Mark Vaughan
2007-03-28 04:44:23 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Drew Rogge
2007-03-28 07:17:48 UTC
Re: [CAD_CAM_EDM_DRO] automated "labjack"
Graham Stabler
2007-03-28 11:25:44 UTC
Re: automated "labjack"
Archie
2007-03-28 11:40:19 UTC
Re: [CAD_CAM_EDM_DRO] automated "labjack"
Andy Wander
2007-03-28 11:49:52 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Bob Campbell
2007-03-28 11:57:51 UTC
Re: [CAD_CAM_EDM_DRO] automated "labjack"
R Wink
2007-03-28 12:04:16 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Mark Vaughan
2007-03-28 12:19:27 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Mark Vaughan
2007-03-28 12:22:39 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Graham Stabler
2007-03-28 12:57:54 UTC
Re: automated "labjack"
R Wink
2007-03-28 13:46:22 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Mark Vaughan
2007-03-28 14:41:04 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Mark Vaughan
2007-03-28 14:50:24 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Mark Vaughan
2007-03-28 14:51:16 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Mark Vaughan
2007-03-28 15:10:55 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
wanliker@a...
2007-03-28 15:20:43 UTC
automated "labjack"
wanliker@a...
2007-03-28 15:36:53 UTC
automated "labjack"
Mark Vaughan
2007-03-28 23:14:05 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Mark Vaughan
2007-03-29 01:01:51 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
Graham Stabler
2007-03-29 02:41:52 UTC
Re: automated "labjack"
Mark Vaughan
2007-03-29 03:30:42 UTC
RE: [CAD_CAM_EDM_DRO] Re: automated "labjack"
Mark Vaughan
2007-03-29 04:28:33 UTC
RE: [CAD_CAM_EDM_DRO] automated "labjack"
turbulatordude
2007-03-29 06:05:34 UTC
Re: automated "labjack"
Graham Stabler
2007-03-29 13:41:27 UTC
Re: automated "labjack"
Graham Stabler
2007-03-29 13:41:51 UTC
Re: automated "labjack"
Mark Vaughan
2007-03-29 15:21:54 UTC
RE: [CAD_CAM_EDM_DRO] Re: automated "labjack"
ballendo
2007-03-29 23:52:55 UTC
Automated "lifter"
ballendo
2007-03-30 00:07:59 UTC
Re: automated "labjack"
ballendo
2007-03-30 00:12:11 UTC
Re: automated "labjack"
Graham Stabler
2007-03-30 04:33:25 UTC
Re: automated "labjack"
Graham Stabler
2007-03-30 04:40:38 UTC
Re: automated "labjack"
Graham Stabler
2007-03-30 04:44:31 UTC
Re: automated "labjack"
Mark Vaughan
2007-03-30 05:09:13 UTC
RE: [CAD_CAM_EDM_DRO] Re: automated "labjack"
Graham Stabler
2007-03-30 06:45:34 UTC
Re: automated "labjack"
David G. LeVine
2007-03-30 09:11:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: automated "labjack"
Graham Stabler
2007-03-30 11:54:37 UTC
Re: automated "labjack"
Alan KM6VV
2007-03-30 12:47:57 UTC
RE: [CAD_CAM_EDM_DRO] Re: automated "labjack"
R Wink
2007-03-30 14:43:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: automated "labjack"
Mark Vaughan
2007-03-30 15:03:42 UTC
RE: [CAD_CAM_EDM_DRO] Re: automated "labjack"