Re: [CAD_CAM_EDM_DRO] Re: microstepping drivers
Posted by
Wayne Weedon
on 2007-04-25 14:11:15 UTC
hannu wrote:
Microstepping drive for 28UKP + VAT.
They are also a very good drive.
Wayne....
--
---------------------------------------------------------------------------
Wayne M Weedon Email: wayne@...
Fdos Design Poole UK
Tel +44-1202-677025 Fax +44-1202-770515 Mobile: 07774 439915
Specialists in small batch & Production Mechanical/Electrical Engineering
---------------------------------------------------------------------------
>The Leadshine Chinese drives are not too expensive, I can buy a 32v 2.5A
> but im still stuck without any resonable druver solution for slow speed,
> under 30-50v drives.
Microstepping drive for 28UKP + VAT.
They are also a very good drive.
Wayne....
--
---------------------------------------------------------------------------
Wayne M Weedon Email: wayne@...
Fdos Design Poole UK
Tel +44-1202-677025 Fax +44-1202-770515 Mobile: 07774 439915
Specialists in small batch & Production Mechanical/Electrical Engineering
---------------------------------------------------------------------------
Discussion Thread
Tom Kulaga
1999-05-09 16:02:28 UTC
Introduction
David Johnson
1999-07-03 11:16:28 UTC
Introduction
Hugh Prescott
1999-07-03 12:06:56 UTC
Re: Introduction
Mo
1999-07-03 16:52:25 UTC
Re: Introduction
Jon Elson
1999-07-03 23:18:54 UTC
Re: Introduction
Anne Ogborn
2000-10-06 22:18:19 UTC
Introduction
funluva22
2007-04-24 16:32:25 UTC
Introduction
hannu
2007-04-25 02:09:15 UTC
Re: [CAD_CAM_EDM_DRO] re: microstepping drivers
jeffalanp
2007-04-25 12:48:51 UTC
Re: microstepping drivers
hannu
2007-04-25 13:45:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: microstepping drivers
caudlet
2007-04-25 13:57:50 UTC
Re: microstepping drivers
JanRwl@A...
2007-04-25 14:04:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: microstepping drivers
Wayne Weedon
2007-04-25 14:09:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: microstepping drivers
Wayne Weedon
2007-04-25 14:11:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: microstepping drivers
Mark Vaughan
2007-04-25 14:37:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: microstepping drivers
Mark Vaughan
2007-04-25 14:57:03 UTC
RE: [CAD_CAM_EDM_DRO] Re: microstepping drivers
caudlet
2007-04-25 18:05:32 UTC
Re: microstepping drivers
David G. LeVine
2007-04-25 19:55:07 UTC
RE: [CAD_CAM_EDM_DRO] Re: microstepping drivers
Mark Vaughan
2007-04-26 00:08:12 UTC
RE: [CAD_CAM_EDM_DRO] Re: microstepping drivers
Lester Caine
2007-04-26 02:58:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: microstepping drivers
Mark Vaughan
2007-04-26 05:42:32 UTC
RE: [CAD_CAM_EDM_DRO] Re: microstepping drivers
funluva22
2007-04-27 14:55:09 UTC
Re: microstepping drivers
ballendo
2007-04-28 22:57:47 UTC
Re: microstepping drivers
ballendo
2007-04-28 23:05:54 UTC
Re: microstepping drivers
Mark Vaughan
2007-04-29 01:13:20 UTC
RE: [CAD_CAM_EDM_DRO] Re: microstepping drivers