CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Ref: rant

Posted by Peter Reilley
on 2008-04-06 10:46:01 UTC
You are missing the big one. If, you know who, had not
screwed up then humans would have 2, 4 or 8 fingers and
we would be entirely compatible with computers. ;-) With
8 fingers then the hex number system would be natural.

This is coming from a computer programmer who still
has to use a calculator to add hex numbers if they have more
than 2 digits.

Pete.



----- Original Message -----
From: stan
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Sunday, April 06, 2008 1:27 PM
Subject: [CAD_CAM_EDM_DRO] Ref: rant


> You're 6 days late with this one. Why not make Pi 3.0 while
> you're at it? Also adjust the second so there are exactly a
> million in 2 weeks. How about make 2 Lbs per Kg instead of that
> messy 2.2?
Don't get the 6 days but pi could definitely do with some attention. Seconds
are OK though, all the multiples of 12 are nice and make life much easier.
Pounds always bugger me up, tend to convert to stone and work out how
many 'me's' are in it. 0.62 Km to a mile can stay too, it makes long
journeys
much easier with wasting time figuring out 'so whats that in miles?' And it
means you can go way to fast when off foreign and use the 'oh, there
kilo-meters are they?' excuse.
Those quart things could do with some attention too, a lot to liter like.
Don't want to mess up the gallon though, that would mess up the pint and we
wouldn't want that. Oh, somebodies already done it...
:)

Discussion Thread

Peter Reilley 2008-04-06 07:02:46 UTC Re: [CAD_CAM_EDM_DRO] rant stan 2008-04-06 07:51:17 UTC Ref: rant Peter Reilley 2008-04-06 08:03:07 UTC Re: [CAD_CAM_EDM_DRO] Ref: rant Tony Jeffree 2008-04-06 09:23:56 UTC Re: [CAD_CAM_EDM_DRO] Ref: rant stan 2008-04-06 09:36:38 UTC Ref: rant Jon Elson 2008-04-06 09:47:27 UTC Re: [CAD_CAM_EDM_DRO] rant stan 2008-04-06 10:27:13 UTC Ref: rant Peter Reilley 2008-04-06 10:46:01 UTC Re: [CAD_CAM_EDM_DRO] Ref: rant R.L. Wurdack 2008-04-06 10:51:29 UTC Re: [CAD_CAM_EDM_DRO] rant stan 2008-04-06 10:52:38 UTC Alternatives to ballscrews stan 2008-04-06 11:02:02 UTC Ref: rant turbulatordude 2008-04-06 11:09:26 UTC Re: rant R.L. Wurdack 2008-04-06 11:33:07 UTC Re: [CAD_CAM_EDM_DRO] Re: rant stan 2008-04-06 11:34:51 UTC Ref: rant stan 2008-04-06 12:05:36 UTC Re: [CAD_CAM_EDM_DRO] Re: rant Jim Peck Stamping 2008-04-06 12:32:54 UTC rant Jim Peck Stamping 2008-04-06 13:00:51 UTC rant R.L. Wurdack 2008-04-06 13:34:40 UTC Re: [CAD_CAM_EDM_DRO] rant Peter Reilley 2008-04-06 15:13:21 UTC Re: [CAD_CAM_EDM_DRO] Re: rant Steve Blackmore 2008-04-06 16:59:36 UTC Re: [CAD_CAM_EDM_DRO] rant stan 2008-04-06 17:08:12 UTC Re: [CAD_CAM_EDM_DRO] rant Matthew Tinker 2008-04-06 17:16:38 UTC Re: [CAD_CAM_EDM_DRO] rant Jon Elson 2008-04-06 17:35:54 UTC Re: [CAD_CAM_EDM_DRO] Ref: rant stan 2008-04-06 17:44:04 UTC Ref: rant wanliker@a... 2008-04-06 17:53:03 UTC Ref: rant Jim Register 2008-04-06 17:57:55 UTC Laser Metrology (was Re: rant) stan 2008-04-06 18:31:33 UTC Re: [CAD_CAM_EDM_DRO] Laser Metrology (was Re: rant) stan 2008-04-06 18:55:02 UTC Ref: Laser Metrology Brian Foley 2008-04-06 20:52:42 UTC Re: [CAD_CAM_EDM_DRO] Ref: rant Jim Peck Stamping 2008-04-07 04:00:27 UTC rant caudlet 2008-04-07 06:47:18 UTC Re: Ref: rant [Off Topic] Matthew Tinker 2008-04-07 06:49:42 UTC Re: [CAD_CAM_EDM_DRO] Ref: rant Tony Smith 2008-04-07 07:45:14 UTC RE: [CAD_CAM_EDM_DRO] rant dickw@n... 2008-04-07 13:16:10 UTC Re: [CAD_CAM_EDM_DRO] Ref: Laser Metrology stan 2008-04-07 14:16:07 UTC Ref: Laser Metrology Graham Stabler 2008-04-07 15:28:14 UTC Re: Ref: Laser Metrology R.L. Wurdack 2008-04-07 19:40:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Ref: Laser Metrology vrsculptor 2008-04-07 20:20:05 UTC Re: Ref: Laser Metrology Peter Reilley 2008-04-07 20:21:26 UTC Re: [CAD_CAM_EDM_DRO] Ref: Laser Metrology