CAD CAM EDM DRO - Yahoo Group Archive

Re: Plotter driver

Posted by Gary Davison
on 2009-01-09 11:42:05 UTC
That's what I've been doing for the last 4 years....it's just a PIA.

BTW I noticed an error in my plotter number, it's a Draftmaster l
7595A,,, requires HP-GL-------NOT HP-GL/2.

There should be a way too get the drivers off a 98' or 2000 disk into
XP...

There is a solution out there some where.....I know it...

Thanks

Gary




--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Alan Marconett" <KM6VV@...>
wrote:
>
> Just a thought,
>
> Why not run the plotter off of an older PC running W98 or
whatever. Output
> your drawing to a PLT file (HPGL) first, and then just send the
file over to
> the machine to be plotted.
>
> Alan KM6VV
>
> -----Original Message-----
> On Behalf Of Gary Davison
>
> Re: Plotter driver
>
>
> Thanks guys for all replys....i have tried all drivers that came
with
> XP..none work...
>
> There are a couple inkjet plotters for sale within driving
> distance..may just get one and junk the old pen plotter.....
>
> Gary
>

Discussion Thread

Gary Davison 2009-01-06 19:42:39 UTC Plotter driver Mark Bingham 2009-01-06 22:24:25 UTC Re: Plotter driver Gary Davison 2009-01-07 05:47:03 UTC Re: Plotter driver Jon Elson 2009-01-07 09:51:54 UTC Re: [CAD_CAM_EDM_DRO] Plotter driver Andy Wander 2009-01-07 09:54:50 UTC RE: [CAD_CAM_EDM_DRO] Plotter driver carre200018 2009-01-07 10:39:09 UTC Re: Plotter driver Mark Bingham 2009-01-07 12:43:10 UTC Re: Plotter driver Gary Davison 2009-01-08 06:06:59 UTC Plotter ink Andy Wander 2009-01-08 06:14:25 UTC RE: [CAD_CAM_EDM_DRO] Plotter ink Hugh Prescott 2009-01-08 06:40:25 UTC Re: [CAD_CAM_EDM_DRO] Plotter ink 556RECON 2009-01-08 06:53:54 UTC Re: [CAD_CAM_EDM_DRO] Plotter ink Bob Headrick 2009-01-08 07:36:01 UTC RE: [CAD_CAM_EDM_DRO] Plotter ink Hugh Prescott 2009-01-08 08:35:33 UTC Re: [CAD_CAM_EDM_DRO] Plotter ink turbulatordude 2009-01-08 17:37:23 UTC Re: Plotter ink carre200018 2009-01-08 17:39:31 UTC Re: Plotter driver Brian Worth 2009-01-08 17:40:09 UTC Re: [CAD_CAM_EDM_DRO] Plotter driver Mark Bingham 2009-01-08 17:40:44 UTC Re: [CAD_CAM_EDM_DRO] Plotter ink turbulatordude 2009-01-08 17:43:49 UTC Re: Plotter driver kabowers@N... 2009-01-08 18:13:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Plotter ink R Wink 2009-01-08 19:19:26 UTC RE: [CAD_CAM_EDM_DRO] Plotter driver Gary Davison 2009-01-09 05:42:12 UTC Re: Plotter driver Alan Marconett 2009-01-09 11:24:27 UTC RE: [CAD_CAM_EDM_DRO] Re: Plotter driver Gary Davison 2009-01-09 11:42:05 UTC Re: Plotter driver R Wink 2009-01-09 14:29:51 UTC RE: [CAD_CAM_EDM_DRO] Re: Plotter driver Steve Blackmore 2009-01-09 15:22:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Plotter driver Gary Davison 2009-01-09 17:57:56 UTC Re: Plotter driver Dave Halliday 2009-01-09 23:50:35 UTC RE: [CAD_CAM_EDM_DRO] Re: Plotter driver fortino tan 2009-01-12 20:44:12 UTC RE: [CAD_CAM_EDM_DRO] Plotter ink