CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: BEI encoder replacement

on 2010-10-12 05:11:02 UTC
Pity about that.

Heve a look at these. You could install within a day;

http://www.amtencoder.com/Product
http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=1966131&k=amt

http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=us&keywords=AMT102-V%20KIT

http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=us&keywords=AMT103-V


Regards
Roland



On 11 October 2010 23:46, James Reed <jsreed@...> wrote:

>
>
>
> Well, I tried a new bulb, and only B channel worked. I took it to a friend
> and "expert" who broke the glass scale. So I am taking the whole encoder out
> and trying to figure out how to quickly replace it with a Avago (HP)
> encoder. That's why I wanted to find the person who had done this before.
>
> To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO%40yahoogroups.com>
> From: dmauch@... <dmauch%40seanet.com>
> Date: Mon, 11 Oct 2010 20:50:51 +0000
> Subject: [CAD_CAM_EDM_DRO] Re: BEI encoder replacement
>
>
> Lets us know what you ended up doing to fix the encoder.
>
> Dan Mauch
>
> www.camtronics-cnc.com
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO%40yahoogroups.com>,
> "goslowjimbo" <jsreed@...> wrote:
>
> >
>
> > This message is cross posted on several web sites. The Z axis on my
> Bridgeport BTC1 has acted up. Seems the encoder used (past tense) an
> incandescent bulb. I once found an editorial where someone replaced one of
> these can type BEI encoders with one of the new, miniature all solid state
> encoders. They had a complete pictorial on how to do it, although, as I
> recall, they didn't tell much about the bearings and what kind of hardware
> they had to use to adapt. Does anyone recall this article, and where it is?
> I'd love to ask the editor some questions.
>
> >
>
>
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]

Discussion Thread

goslowjimbo 2010-10-09 11:51:32 UTC BEI encoder replacement Dan Mauch 2010-10-09 12:30:45 UTC BEI encoder replacement Danny Miller 2010-10-09 12:34:58 UTC Re: [CAD_CAM_EDM_DRO] BEI encoder replacement Jon Elson 2010-10-09 18:04:49 UTC Re: [CAD_CAM_EDM_DRO] BEI encoder replacement Andrewdavid.mathison 2010-10-10 06:33:11 UTC Re:BEI encoder replacement Dan Mauch 2010-10-10 07:22:54 UTC Re:BEI encoder replacement Jon Elson 2010-10-10 10:58:10 UTC Re: [CAD_CAM_EDM_DRO] Re:BEI encoder replacement Danny Miller 2010-10-10 11:01:18 UTC Re: [CAD_CAM_EDM_DRO] Re:BEI encoder replacement Andrewdavid.mathison 2010-10-11 08:23:04 UTC Re:BEI encoder replacement danmauch 2010-10-11 09:35:25 UTC Re:BEI encoder replacement Andy Wander 2010-10-11 10:30:38 UTC RE: [CAD_CAM_EDM_DRO] Re:BEI encoder replacement Tony Smith 2010-10-11 13:38:57 UTC RE: [CAD_CAM_EDM_DRO] Re:BEI encoder replacement Tony Smith 2010-10-11 13:46:42 UTC RE: [CAD_CAM_EDM_DRO] Re:BEI encoder replacement danmauch 2010-10-11 13:54:37 UTC Re: BEI encoder replacement James Reed 2010-10-11 16:39:19 UTC RE: [CAD_CAM_EDM_DRO] Re: BEI encoder replacement Roland Jollivet 2010-10-12 05:11:02 UTC Re: [CAD_CAM_EDM_DRO] Re: BEI encoder replacement Jon Elson 2010-10-12 09:49:02 UTC Re: [CAD_CAM_EDM_DRO] Re: BEI encoder replacement James Reed 2010-10-14 07:37:08 UTC RE: [CAD_CAM_EDM_DRO] Re: BEI encoder replacement