Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info

>
> Hi,
>
> If anyone has these articles I would very much appreciate a copy of them. I
> have been trying for some time to find them or a copy of the book but both
> appear to be out of print. Contact me off list to arrange recompense etc.
> Thanks,
>
> Ian
>
> ----- Original Message -----
> From: Jon Elson <jmelson@...>
> >
> > This sounds like the Robert Langlois article, from about late 1997 to
> > mid 1998 in
> > the Home Shop machinist. It used a digital control system, with about a
> > dozen
> > chips in it, to control the electrode height from the voltage across the
> >
> > electrode - work. I only have the last installment or two, it was just
> > winding up
> > as my subscription started.
>
> Ian
> --
> Ian W. Wright
> Sheffield UK
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager