CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ?

Posted by Matt Shaver
on 2000-10-08 20:53:06 UTC
> From: Bob Bachman <bobach@...>
> Restarted pc in the dos mode, changed to \linux directory, type
> 'linux', enter. Third disappointment. Says 'Image file not found',
> can't find vmlinuz.
> Well, says I, 'guess it doesn't like not being on the C: drive.

The file linux.bat needs to be edited to point to the partition where the
kernel is located. For e: you'd want to substitute hda3 for hda1 in that
batch file (list the file and you'll see where it goes).

> I get out a 1 gig hard drive with RH5.2 already on it and delete
> everything on it, use linux fdisk to remove the linux file structure.
> Try to install W98 on the 'empty' drive. Uh uh. The dos fdisk
> finds a leftover linux partition that it can't delete. Get out
> the RH5.2 cd and floppy and go thru a partial install to erase
> the old partition. This time I get a good W98 install.
>
> Back to 'EMC in 10 minutes' cd. I start a new install using WPKzip
> and all goes as planned. Restart pc in dos mode, change to \linux
> directory, type linux and get the same gd 'Image file not found'
> message! The linux.bat file is trying to load 'vmlinuz' but it is
> not to be found anywhere. Used windows explorer to search the hd
> to no avail.

The file, vmlinuz, should be in the linux directory with the linux.bat file.
My guess is that something went wrong with the unzipping part. You really
need pkzip25.exe which is contained in:

ftp://ftp.pkware.com/pk250c32.exe

I think this is one thing that needs changing regarding this disk. We need to
change to something like gzip which is GPL and could be included on the CD.

> Hunted around on the ZIPEMC cd and found a Slackware.zip and bat
> file to install it. Ahh, says I, this time I got it. Of course,
> this bat file wants to use PKZIP25.EXE which we dont have, but
> I tell it to put the slackware files on C: and it unzips into
> the \linux directory as desired. Restart in the dos mode.
> Type 'linux', screen fills with lots of goodies and WOW!,
> Asks for a login. Typed in 'root' and 'zipemc' for password.
> Get -
> darkstar:~#
> Type in 'startx'
> 'File not found'

The problem is the slackware.zip doesn't contain X windows. You were right to
start with Zipemc.zip.

When I got this CD, I couldn't get any of my unzipping programs to work. Once
I got pkzip25.exe, I unzipped the linux directory, restarted in DOS mode,
CD'ed to c:\linux and ran linux.bat and it worked. If it's any consolation, I
spent about 3 hours fooling around with various versions of pkzip and winzip
before I got the right one.

Matt

Discussion Thread

William Scalione 2000-09-01 16:59:38 UTC Re: [CAD_CAM_EDM_DRO] EMC in 10 minutes??? Jon Elson 2000-09-01 22:35:05 UTC Re: [CAD_CAM_EDM_DRO] EMC in 10 minutes??? bfp 2000-09-02 09:28:17 UTC Re: [CAD_CAM_EDM_DRO] EMC in 10 minutes??? Jon Anderson 2000-09-02 11:09:29 UTC Re: [CAD_CAM_EDM_DRO] EMC in 10 minutes??? Dennis Fielder 2000-09-02 11:39:11 UTC PC ports, Encoder resolution and EDM PSU info Alan Marconett KM6VV 2000-09-02 12:14:00 UTC Re: [CAD_CAM_EDM_DRO] EMC in 10 minutes??? Tim Goldstein 2000-09-02 15:04:06 UTC RE: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Paul Corner 2000-09-02 16:12:25 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info William Scalione 2000-09-02 17:10:16 UTC Re: [CAD_CAM_EDM_DRO] EMC in 10 minutes??? Jon Elson 2000-09-02 23:16:40 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Jon Elson 2000-09-02 23:33:00 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Ian Wright 2000-09-03 02:55:47 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info dave engvall 2000-09-04 10:44:14 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Dennis Fielder 2000-09-04 15:14:46 UTC RE: [CAD_CAM_EDM_DRO] Spindle Encoder resolution Jon Elson 2000-09-04 23:20:07 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Jon Elson 2000-09-04 23:41:07 UTC Re: [CAD_CAM_EDM_DRO] Spindle Encoder resolution diazden 2000-09-05 17:32:11 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Robert Grauman 2000-09-05 19:25:26 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Jon Elson 2000-09-05 21:56:04 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Ian Wright 2000-09-06 01:13:47 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Ron Ginger 2000-09-06 06:09:08 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Ian Wright 2000-09-06 12:46:26 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info diazden 2000-09-06 16:25:24 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info diazden 2000-09-06 16:31:58 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Robert Grauman 2000-09-06 20:03:52 UTC Re: [CAD_CAM_EDM_DRO] PC ports, Encoder resolution and EDM PSU info Kenn Danner 2000-09-15 10:43:51 UTC Re: [CAD_CAM_EDM_DRO] EMC in 10 minutes??? Lee Studley 2000-09-27 10:20:35 UTC Re: EMC in 10 minutes??? Any updates? Dan Falck 2000-09-27 16:01:04 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? Lee Studley 2000-09-27 17:16:49 UTC Re: EMC in 10 minutes??? Any updates? PMeinhard@a... 2000-09-27 23:25:58 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? Dan Mauch 2000-09-28 07:30:13 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? Dan Eaton 2000-09-28 12:03:06 UTC Re: EMC in 10 minutes??? Any updates? Matt Shaver 2000-09-28 12:10:20 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? James Owens 2000-09-28 19:03:19 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? Ian Wright 2000-09-29 02:27:28 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? James Owens 2000-09-29 12:07:41 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? Lee & Chris studley 2000-10-07 10:45:52 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? Dan Falck 2000-10-07 11:51:51 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? Lee Studley 2000-10-07 12:16:19 UTC Re: EMC in 10 minutes??? Any updates? Anne Ogborn 2000-10-08 12:41:44 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? wanliker@a... 2000-10-08 17:49:24 UTC Re: [CAD_CAM_EDM_DRO] Re: EMC in 10 minutes??? Any updates? Bob Bachman 2000-10-08 19:15:10 UTC [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? Matt Shaver 2000-10-08 20:53:06 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? bfp 2000-10-09 03:22:34 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? William Scalione 2000-10-09 08:59:48 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? Matt Shaver 2000-10-09 09:41:52 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? Ian Wright 2000-10-12 01:34:42 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? Ray 2000-10-12 09:31:25 UTC Re: Re: EMC in 10 minutes + 6 hours + ? bfp 2000-10-12 11:46:32 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? bfp 2000-10-12 12:25:07 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? Ian Wright 2000-10-13 01:17:54 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? Bob Bachman 2000-10-13 19:17:19 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? Matt Shaver 2000-10-13 20:34:31 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ? Ian Wright 2000-10-14 02:21:14 UTC Re: [CAD_CAM_EDM_DRO]EMC in 10 minutes + 6 hours + ?