CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Slightly off-topic : History behind lettered drills

on 2000-10-04 08:39:33 UTC
In a message dated 10/3/00 9:40:47 PM Pacific Daylight Time,
dengvall@... writes:

<< Dave

p.s. this really should convert to a thread on measurement. >>
Don't get me started on this subject! One of my major gripes after serving on
the US metrification council for the construction industry and fighting with
"soft" vs "hard" conversions, modules, nail sizes, wood sizes, etc etc. Not
to mention Stubbs gauge vs Brown and Sharp gauge.
John Meacham

Discussion Thread

dave engvall 2000-10-03 21:40:18 UTC Re: [CAD_CAM_EDM_DRO] Slightly off-topic : History behind lettered drills catboat15@a... 2000-10-04 08:39:33 UTC Re: [CAD_CAM_EDM_DRO] Slightly off-topic : History behind lettered drills Mike 2000-10-04 11:29:44 UTC Help: Machine Control Software Advice Joe Vicars 2000-10-04 11:39:25 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Chris Hellyar 2000-10-04 11:57:41 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Alan Marconett KM6VV 2000-10-04 12:50:53 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Rick Dulas 2000-10-04 13:59:36 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice ballendo@y... 2000-10-04 15:14:08 UTC re:Help: Machine Control Software Advice Mike 2000-10-04 16:39:05 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice cnc002@a... 2000-10-04 16:39:27 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Carey L. Culpepper 2000-10-04 17:09:23 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice cnc002@a... 2000-10-04 18:05:58 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Ozzie@h... 2000-10-04 20:26:00 UTC Re: Help: Machine Control Software Advice Chris Hellyar 2000-10-05 01:07:25 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice cnc002@a... 2000-10-05 12:27:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Help: Machine Control Software Advice