CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Slightly off-topic : History behind lettered drills

Posted by dave engvall
on 2000-10-03 21:40:18 UTC
>
> to sell the nails which were previously 1UKP per 1lb at 1UKP per 0.457kg -
> as far as we're concerned they're still 'a pahnd a pahnd' but now with a
> slightly French accent!!! ;o0

I believe the factor is closer to 0.4537 unless something like g has an interesting perterbation in UK. However you never know.
:-)

I will agree that making the jump from 1 mm to 1 meter is nasty.
However orders of magnitude only make a real difference in pay checks. I should think that when doing one to one correspondence
for counting, etc. one would naturally us units that children could manipulate, e.g. cm and dm and maybe m.
Most of us can get a grip on that. :-)

the clinical lab people tend to use mg/dl. which seems a little unnatural but then you know those biologists.

Now having made everyone mad at me I will bail out.

Dave

p.s. this really should convert to a thread on measurement.

Discussion Thread

dave engvall 2000-10-03 21:40:18 UTC Re: [CAD_CAM_EDM_DRO] Slightly off-topic : History behind lettered drills catboat15@a... 2000-10-04 08:39:33 UTC Re: [CAD_CAM_EDM_DRO] Slightly off-topic : History behind lettered drills Mike 2000-10-04 11:29:44 UTC Help: Machine Control Software Advice Joe Vicars 2000-10-04 11:39:25 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Chris Hellyar 2000-10-04 11:57:41 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Alan Marconett KM6VV 2000-10-04 12:50:53 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Rick Dulas 2000-10-04 13:59:36 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice ballendo@y... 2000-10-04 15:14:08 UTC re:Help: Machine Control Software Advice Mike 2000-10-04 16:39:05 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice cnc002@a... 2000-10-04 16:39:27 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Carey L. Culpepper 2000-10-04 17:09:23 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice cnc002@a... 2000-10-04 18:05:58 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice Ozzie@h... 2000-10-04 20:26:00 UTC Re: Help: Machine Control Software Advice Chris Hellyar 2000-10-05 01:07:25 UTC Re: [CAD_CAM_EDM_DRO] Help: Machine Control Software Advice cnc002@a... 2000-10-05 12:27:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Help: Machine Control Software Advice