Re: [CAD_CAM_EDM_DRO] Re: Cheap DRO system using digital scales and a PC

Lee; I can send you the mitutoyo pamphlet that contains all the data that you want
regards
mariano


Lee Studley wrote:

> Hi,
>
> Well my 1st attempt has deepened the puzzle. I was wrong about the
> async format. I found 2 bursts of data syncronous with the clock
> at 2 sections of 24 bits clocked out at a rate of 13uS per bit.
> These 48bit packets are transmitted at 6.3hz or 158.7 mS apart.
>
> Next I'll rigg up a Pic to sample the data and transmit an ascii 0 or
> 1 via async format depending on the bits it samples and log the data
> using hyperterm. It didnt appear that all the data is contained in
> the 48bit bursts, so it may be a series of data as the article
> describes. The data rate is much higher then the articles
> description. I'm suspecting that different manufactures may
> use different proprietary formats.
>
> I'll share my findings, as soon as I find some time to rig
> the setup.
> -Lee
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager