CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Just to change the subject

Posted by Jon Anderson
on 2001-01-14 09:56:24 UTC
Alvaro Fogassa wrote:

> Another option would be to get a blank mt3 and cut a 3/4X16 thread on
> it and use the same end mill holders that sherline sells.

Try looking/asking around, you just might be able to find something like
this. The Sherline holders really do work pretty well. You will want to
make sure they are tight when cutting metals with larger end mills.

Jon

Discussion Thread

Alvaro Fogassa 2001-01-13 22:04:39 UTC Just to change the subject Jon Elson 2001-01-14 00:12:44 UTC Re: [CAD_CAM_EDM_DRO] Just to change the subject BillDarby 2001-01-14 06:49:08 UTC Re: [CAD_CAM_EDM_DRO] Just to change the subject Alvaro Fogassa 2001-01-14 08:47:00 UTC Re: Just to change the subject Jon Anderson 2001-01-14 09:56:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Just to change the subject Ward M. 2001-01-14 13:59:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Just to change the subject Brian Pitt 2001-01-14 17:18:46 UTC Re: [CAD_CAM_EDM_DRO] Just to change the subject Derek B. 2001-01-14 20:32:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Just to change the subject Ward M. 2001-01-15 02:10:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Just to change the subject