CAD CAM EDM DRO - Yahoo Group Archive

Re: faster steppers

Posted by indigo_red@q...
on 2001-03-21 11:05:10 UTC
Sounds like you're hitting one of the resonance points on the
stepper (and attached mechanism). A microstepping drive has inherent
damping and may get you thru the 'bad' spots.

Mariss has good info on this in his white pages on steppers.

-Lee

> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >

Discussion Thread

Henrik Olsson 2001-03-21 08:47:11 UTC Re: [CAD_CAM_EDM_DRO] faster steppers Ian Wright 2001-03-21 10:44:08 UTC Re: [CAD_CAM_EDM_DRO] faster steppers indigo_red@q... 2001-03-21 11:05:10 UTC Re: faster steppers Ian Wright 2001-03-21 15:31:19 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Paul 2001-03-21 16:15:21 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers indigo_red@q... 2001-03-21 17:09:58 UTC Re: faster steppers Jon Elson 2001-03-21 21:07:00 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers ballendo@y... 2001-03-22 07:42:37 UTC Re: faster steppers ballendo@y... 2001-03-22 08:09:03 UTC Re: faster steppers Tom Eldredge 2001-03-22 08:21:56 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Tim Goldstein 2001-03-22 08:54:48 UTC RE: [CAD_CAM_EDM_DRO] Re: faster steppers ballendo@y... 2001-03-22 09:00:34 UTC Re: faster steppers Tim Goldstein 2001-03-22 09:18:41 UTC RE: [CAD_CAM_EDM_DRO] Re: faster steppers Tim Goldstein 2001-03-22 09:22:46 UTC RE: [CAD_CAM_EDM_DRO] Re: faster steppers ballendo@y... 2001-03-22 09:35:15 UTC Re: faster steppers Alan Marconett KM6VV 2001-03-22 11:30:53 UTC Re: faster steppers Jon Elson 2001-03-22 11:50:34 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Jon Elson 2001-03-22 12:04:22 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Henrik Olsson 2001-03-22 12:10:13 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Alan Marconett KM6VV 2001-03-22 12:12:50 UTC Re: faster steppers Jeff Demand 2001-03-22 12:24:26 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Jon Elson 2001-03-22 12:25:39 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Ian Wright 2001-03-22 12:34:56 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Henrik Olsson 2001-03-22 12:40:16 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Tim Goldstein 2001-03-22 12:42:18 UTC RE: [CAD_CAM_EDM_DRO] Re: faster steppers Alan Marconett KM6VV 2001-03-22 15:08:43 UTC Re: faster steppers Alan Marconett KM6VV 2001-03-22 15:13:30 UTC Re: faster steppers Alan Marconett KM6VV 2001-03-22 15:14:48 UTC Re: faster steppers Alan Marconett KM6VV 2001-03-22 15:33:06 UTC Re: faster steppers Smoke 2001-03-22 15:48:09 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Tim Goldstein 2001-03-22 15:49:53 UTC RE: [CAD_CAM_EDM_DRO] Re: faster steppers Smoke 2001-03-22 16:13:17 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers ballendo@y... 2001-03-22 16:16:53 UTC Re: faster steppers ballendo@y... 2001-03-22 17:27:07 UTC speed determination was Re: faster steppers Alan Marconett KM6VV 2001-03-22 17:48:34 UTC Re: faster steppers Alan Marconett KM6VV 2001-03-22 17:52:56 UTC Re: faster steppers Alan Marconett KM6VV 2001-03-22 18:52:44 UTC Re: [CAD_CAM_EDM_DRO] speed determination was Re: faster steppers Ian Wright 2001-03-23 01:23:30 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Tom Eldredge 2001-03-23 07:03:09 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers beer@s... 2001-03-23 09:26:43 UTC Re: faster steppers Henrik Olsson 2001-03-23 10:22:44 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Paul 2001-03-23 15:14:50 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Alan Marconett KM6VV 2001-03-23 15:50:13 UTC Re: faster steppers Jon Elson 2001-03-23 15:58:25 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers Alan Marconett KM6VV 2001-03-23 16:21:58 UTC Re: faster steppers Alan Marconett KM6VV 2001-03-23 16:38:50 UTC Re: faster steppers Henry Palonen 2001-03-24 06:34:54 UTC Re: faster steppers (and Eagle PCB output) Alan Marconett KM6VV 2001-03-24 12:40:28 UTC Re: faster steppers (and Eagle PCB output) ballendo@y... 2001-03-24 21:25:49 UTC Re: faster steppers Henry Palonen 2001-03-25 07:04:18 UTC Re: [CAD_CAM_EDM_DRO] Re: faster steppers (and Eagle PCB output)