CAD CAM EDM DRO - Yahoo Group Archive

Re: Milling Glass

on 2001-04-10 19:15:54 UTC
Thanks Matt! Looks more like vinyl instead of glass. The
translation is quite funny. I liked the site better in German.

John




--- In CAD_CAM_EDM_DRO@y..., Matt Shaver <mshaver@e...> wrote:
> kleinbauer@j... wrote:
>
>
> > I found a site that shows how to mill pictures onto
> > glass. I am hoping someone can translate the info a little.
> >
> > http://members.aol.com/DHaupt8195/
>
> Try:
>
> http://babel.altavista.com/translate.dyn?urltext=http%3A%2F%
2Fmembers.aol.com%2FDHaupt8195%2F&lp=de_en
>
> Matt

Discussion Thread

kleinbauer@j... 2001-04-10 18:11:19 UTC Milling Glass Matt Shaver 2001-04-10 18:32:52 UTC Re: [CAD_CAM_EDM_DRO] Milling Glass Sven Peter, TAD S.A. 2001-04-10 19:12:40 UTC Re: [CAD_CAM_EDM_DRO] Milling Glass kleinbauer@j... 2001-04-10 19:15:54 UTC Re: Milling Glass kleinbauer@j... 2001-04-10 19:19:26 UTC Re: Milling Glass Andrew Werby 2001-04-11 10:01:58 UTC Re: Milling Glass kleinbauer@j... 2001-04-11 11:14:37 UTC Re: Milling Glass Sven Peter, TAD S.A. 2001-04-11 11:26:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Jeff Swayze 2001-04-11 20:11:51 UTC Re: Milling Glass zeff1015@a... 2001-04-12 04:50:30 UTC [CAD_CAM_EDM_DRO] Re: Milling Glass kleinbauer@j... 2001-04-12 07:38:30 UTC Re: Milling Glass dave engvall 2001-04-12 07:53:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass zeff1015@a... 2001-04-12 07:58:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass diazden 2001-04-12 08:14:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass kleinbauer@j... 2001-04-12 09:11:20 UTC Re: Milling Glass kleinbauer@j... 2001-04-12 09:18:53 UTC Re: Milling Glass kleinbauer@j... 2001-04-12 09:23:46 UTC Re: Milling Glass deanc500@y... 2001-04-12 11:36:36 UTC Re: Milling Glass Ian Wright 2001-04-12 11:42:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Peter Chen 2001-04-12 16:33:35 UTC Milling Glass ballendo@y... 2001-04-12 17:08:16 UTC Re: Milling Glass dave engvall 2001-04-12 21:54:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass e.heritage@b... 2001-04-13 03:23:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Tom Benedict 2001-04-13 04:29:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass kleinbauer@j... 2001-04-13 08:17:54 UTC Re: Milling Glass Andrew Werby 2001-04-13 11:02:32 UTC Re: Milling Glass Chris Paine 2001-04-13 16:43:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Tom Eldredge 2001-04-15 10:54:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Tom Eldredge 2001-04-15 10:54:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass diazden 2001-04-15 16:15:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass kleinbauer@j... 2001-04-15 17:37:32 UTC Re: Milling Glass Jon Elson 2001-04-15 19:38:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass ballendo@y... 2001-04-16 04:33:35 UTC drag knife was Re: Milling Glass e.heritage@b... 2001-04-16 18:04:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass