CAD CAM EDM DRO - Yahoo Group Archive

Re: Milling Glass

on 2001-04-10 19:19:26 UTC
Hi,
I listed the entrance point. I mistook the vinyl stick ons
for glass etching. The site is still neat none the less.

John

--- In CAD_CAM_EDM_DRO@y..., "Sven Peter, TAD S.A." <peteryco@r...>
wrote:
> Hello John,
> This Dirk has quite a lot on his homepage. Very interesting but
> way to much for a 2 finger eagle type writer like me to translate.
> Everything is related with CNC, but I didnĀ“t find glas engraving.
> Which entrance?
> Sven Peter
>
>
> kleinbauer@j... wrote:
>
> > Hi All,
> > I found a site that shows how to mill pictures onto
> > glass. I am hoping someone can translate the info a little.
> > What is the tool the guy is using mounted in what appears
> > to be a stepper as a spindle motor? You can step through
> > the site with the buttons on the bottom or click on
> > Folienschneiden mitder CNC Anlage. I know my last name is
> > the German word for small farmer but I am of English descent.
> >
> >
> >
> >
> > http://members.aol.com/DHaupt8195/
> >
> >
> > John
> >
> >
> > Welcome to CAD_CAM_EDM_DRO@e...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> > Addresses:
> > Post message: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
> >

Discussion Thread

kleinbauer@j... 2001-04-10 18:11:19 UTC Milling Glass Matt Shaver 2001-04-10 18:32:52 UTC Re: [CAD_CAM_EDM_DRO] Milling Glass Sven Peter, TAD S.A. 2001-04-10 19:12:40 UTC Re: [CAD_CAM_EDM_DRO] Milling Glass kleinbauer@j... 2001-04-10 19:15:54 UTC Re: Milling Glass kleinbauer@j... 2001-04-10 19:19:26 UTC Re: Milling Glass Andrew Werby 2001-04-11 10:01:58 UTC Re: Milling Glass kleinbauer@j... 2001-04-11 11:14:37 UTC Re: Milling Glass Sven Peter, TAD S.A. 2001-04-11 11:26:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Jeff Swayze 2001-04-11 20:11:51 UTC Re: Milling Glass zeff1015@a... 2001-04-12 04:50:30 UTC [CAD_CAM_EDM_DRO] Re: Milling Glass kleinbauer@j... 2001-04-12 07:38:30 UTC Re: Milling Glass dave engvall 2001-04-12 07:53:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass zeff1015@a... 2001-04-12 07:58:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass diazden 2001-04-12 08:14:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass kleinbauer@j... 2001-04-12 09:11:20 UTC Re: Milling Glass kleinbauer@j... 2001-04-12 09:18:53 UTC Re: Milling Glass kleinbauer@j... 2001-04-12 09:23:46 UTC Re: Milling Glass deanc500@y... 2001-04-12 11:36:36 UTC Re: Milling Glass Ian Wright 2001-04-12 11:42:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Peter Chen 2001-04-12 16:33:35 UTC Milling Glass ballendo@y... 2001-04-12 17:08:16 UTC Re: Milling Glass dave engvall 2001-04-12 21:54:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass e.heritage@b... 2001-04-13 03:23:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Tom Benedict 2001-04-13 04:29:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass kleinbauer@j... 2001-04-13 08:17:54 UTC Re: Milling Glass Andrew Werby 2001-04-13 11:02:32 UTC Re: Milling Glass Chris Paine 2001-04-13 16:43:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Tom Eldredge 2001-04-15 10:54:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass Tom Eldredge 2001-04-15 10:54:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass diazden 2001-04-15 16:15:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass kleinbauer@j... 2001-04-15 17:37:32 UTC Re: Milling Glass Jon Elson 2001-04-15 19:38:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass ballendo@y... 2001-04-16 04:33:35 UTC drag knife was Re: Milling Glass e.heritage@b... 2001-04-16 18:04:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Milling Glass