CAD CAM EDM DRO - Yahoo Group Archive

Re: Stuck collet

Posted by ballendo@y...
on 2001-05-07 05:29:06 UTC
--- In CAD_CAM_EDM_DRO@y..., yahoo@a... wrote:
> Thanks to everyone for all the sugestions.
> Here are my reactions to the sugestions:
>
> The tube - If the tube compressed or creased, between the tool and
> the inside of the spindle, I would have a BIGger problem.
>
> Hitting the tool on the edge - Since the collet is quite tapered,
> this may work, but it didn't work last time.
>
> Lubrication - Sounds like a good idea, I just but silicon on the
> latest mill.
>
> Changing the design - I think I would thread the inside of the
> spindle, make a threaded rod, with a brass plug on the tool end,
and
> use the treaded rod to jack the collet out.
>
> BUT why are we having to reinvent this? Is it really a lousy design
> that they just keep selling?
>
> Buck
>
>
>
> --- In CAD_CAM_EDM_DRO@y..., Brian Pitt <bfp@e...> wrote:
> > a dab of lipstik (chapstic wont work) on the collet taper helps
> > keep the collet from jamming in the spindle
> > could be worth a try next time
> >
> > Brian

Discussion Thread

yahoo@a... 2001-05-05 22:31:48 UTC Stuck collet Jon Elson 2001-05-06 00:01:50 UTC Re: [CAD_CAM_EDM_DRO] Stuck collet Smoke 2001-05-06 00:15:26 UTC Re: [CAD_CAM_EDM_DRO] Stuck collet yahoo@a... 2001-05-06 05:30:12 UTC Re: Stuck collet Marcus & Eva 2001-05-06 07:33:23 UTC Re: [CAD_CAM_EDM_DRO] Stuck collet Tim Goldstein 2001-05-06 09:38:56 UTC RE: [CAD_CAM_EDM_DRO] Re: Stuck collet Ian Wright 2001-05-06 09:39:46 UTC Re: [CAD_CAM_EDM_DRO] Stuck collet Carol & Jerry Jankura 2001-05-06 10:47:11 UTC RE: [CAD_CAM_EDM_DRO] Re: Stuck collet Jon Anderson 2001-05-06 11:21:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Stuck collet Brian Pitt 2001-05-06 13:43:52 UTC Re: [CAD_CAM_EDM_DRO] Re: Stuck collet yahoo@a... 2001-05-06 20:32:02 UTC Re: Stuck collet JanRwl@A... 2001-05-06 20:34:26 UTC Re: [CAD_CAM_EDM_DRO] Stuck collet ballendo@y... 2001-05-07 05:29:06 UTC Re: Stuck collet ballendo@y... 2001-05-07 05:29:06 UTC Re: Stuck collet ballendo@y... 2001-05-07 05:40:18 UTC Re: Stuck collet ballendo@y... 2001-05-07 05:50:49 UTC Re: Stuck collet yahoo@a... 2001-05-07 07:19:51 UTC Re: Stuck collet beer@s... 2001-05-07 09:01:34 UTC Re: Stuck collet ballendo@y... 2001-05-08 03:06:42 UTC Re: Stuck collet Carey L. Culpepper 2001-05-08 06:56:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Stuck collet R. T. Robbins 2001-05-08 16:24:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Stuck collet ballendo@y... 2001-05-08 21:01:34 UTC Re: Stuck collet Carey L. Culpepper 2001-05-09 10:26:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Stuck collet ballendo@y... 2001-05-10 03:53:09 UTC Re: Stuck collet