CAD CAM EDM DRO - Yahoo Group Archive

Re: EMC help.

Posted by Fred Proctor
on 1999-09-09 06:50:31 UTC
Paul Corner@... wrote:

> Finally re-installed Suse 6.1 and made
> sure I have the correct tcl and tclx files included - hopefully I've also got
> the email configured too.
> No joy - loads of errors when I tried to patch the kernel, so I've now got RH
> 5.2 installed on another patition. Success, at least with the RT patch, not
> with EMC though. One error I've spotted flashing up the screen is
> /X11R6/bi/makedepend not found - do you have any advice ?

It should be /usr/X11R6/bin/makedepend. If you don't have this program,
that's one problem. If you do have the program, and the EMC has it
misspelled, that's another. It seems to me that you probably have it
since you have Red Hat 5.2 installed properly. If you don't, you may
have not selected that you want to install X, and the X development
stuff. You can install these with rpm or glint or the KDE package
manager.

The EMC calls for this program as specified in
/usr/local/nist/rcslib/etc/linux_2_0_36.def. These are makefile
definitions for the Linux 2.0.36 platform. It should contain:

# makedepend must be run from a sun. (Preferably one with a
cross-compiler.)
MAKEDEPEND = /usr/X11R6/bin/makedepend

The comment about being run on a Sun is obsolete. Make sure MAKEDEPEND
is set to your installation's path to makedepend.

--Fred

Discussion Thread

Paul Corner 1999-08-31 17:32:14 UTC EMC help. Fred Proctor 1999-09-01 13:11:10 UTC Re: EMC help. Paul Corner@t... 1999-09-08 18:00:19 UTC Re: EMC help. Jon Elson 1999-09-08 23:21:19 UTC Re: EMC help. Fred Proctor 1999-09-09 06:50:31 UTC Re: EMC help. Paul Corner 1999-09-09 17:39:26 UTC Re: EMC help. Paul Corner 1999-09-09 17:50:10 UTC Re: EMC help. Don Hughes 1999-09-09 17:34:39 UTC Re: EMC help. WAnliker@x... 1999-09-09 18:58:12 UTC Re: EMC help. Don Hughes 1999-09-09 19:08:02 UTC Re: EMC help. Jon Elson 1999-09-09 22:08:26 UTC Re: EMC help. Tim Goldstein 1999-09-09 23:01:41 UTC RE: EMC help. Fred Proctor 1999-09-10 06:53:44 UTC Re: EMC help. Paul Corner 1999-09-11 03:07:14 UTC Re: EMC help. Don Hughes 1999-09-11 16:36:15 UTC Re: EMC help. Jon Elson 1999-09-12 22:19:02 UTC Re: EMC help.