CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] help putting together a complete system

Posted by Art Fenerty
on 2001-06-05 15:06:58 UTC
John:

Inside a Cat Scanner is a normal (but heavy duty) X-Ray tube. The dose
of radiation from a CT is actually far greater than a normal X-Ray, but is
collimated to a slice thickness of typically 5mm or so. But the accumulated
dose is still greater than having an X-Ray of the area being scanned.
As to Magnets, I work with resonance scanners where we magnetise the
human body, making the hydrogen protons spin together in the same
orientation, then by putting a coil perpendicular to the body, we can read a
voltage proportional to the amount of hydrogen (water) in that part of the
body. Talk about your small magnets. The MRI of a head is actually the best
3d data to use for sculpting, you can get the skull or skin or just brain if
you want.

Art
----- Original Message -----
From: <info.host@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, June 05, 2001 2:51 PM
Subject: Re: [CAD_CAM_EDM_DRO] help putting together a complete system


> > Jeff:
> >
> > Very good, and quite workable too. Since I have access to a cat
scanner,
> I
> > do the same thing sorta, but mine requires radiation. (I pretty much
glow
> in
> > the dark these days).
> >
> > And you can eat the bread afterwards.....hmmm the marvels of technology.
>
> Do cat scanners use exactly the same wavelength as a normal x-ray tube in
a
> hospital? Because I've seen them take tens and tens of pictures to slice
up
> someone's head, photographically of coarse, isn't that like having many,
> many x-rays in one go or is each shot a lower energy?
>
> John
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

airport@e... 2001-06-04 14:19:26 UTC help putting together a complete system Art Fenerty 2001-06-04 14:41:35 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system info.host@b... 2001-06-04 15:15:04 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Eric Keller 2001-06-04 15:52:36 UTC RE: [CAD_CAM_EDM_DRO] help putting together a complete system Jeff Demand 2001-06-04 18:00:29 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Art Fenerty 2001-06-04 18:33:02 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Marcus & Eva 2001-06-04 18:39:08 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Smoke 2001-06-04 21:03:42 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system cprosser@a... 2001-06-04 23:32:45 UTC Re: help putting together a complete system Chris Stratton 2001-06-05 05:41:34 UTC Re: [CAD_CAM_EDM_DRO] Re: help putting together a complete system blueveil@e... 2001-06-05 09:31:35 UTC Re: help putting together a complete system info.host@b... 2001-06-05 14:53:31 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Art Fenerty 2001-06-05 15:06:58 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Hugh Prescott 2001-06-05 15:35:43 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Jim Register 2001-06-05 18:17:38 UTC Re: [CAD_CAM_EDM_DRO] Re: help putting together a complete system Art Fenerty 2001-06-05 18:27:47 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Ian Wright 2001-06-06 03:25:37 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system info.host@b... 2001-06-06 13:09:36 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Art Fenerty 2001-06-06 13:38:59 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Chris Stratton 2001-06-06 14:04:55 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Ian Wright 2001-06-07 01:06:19 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system Art Fenerty 2001-06-07 02:45:43 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system info.host@b... 2001-06-07 09:22:19 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system info.host@b... 2001-06-09 11:27:01 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system wanliker@a... 2001-06-09 12:06:54 UTC Re: [CAD_CAM_EDM_DRO] help putting together a complete system