CAD CAM EDM DRO - Yahoo Group Archive

Re: Assembly of ballnut on screw & Screw quality.

Posted by cadman@p...
on 2001-06-06 09:07:46 UTC
This could be a problem then. After I turn a bearing diameter I
won't be able to reach the threads. This will only be a problem on
the X axis screw for my application. Any assembly procedure for
adding the balls back into the nut once on the screw?


CADMAN

--- In CAD_CAM_EDM_DRO@y..., "Joel Jacobs" <jj@n...> wrote:
> Yes, just butt the tube up to the end of the screw and turn the nut
onto the
> screw. To remove the nut hold the tube up to the end of the screw
and turn
> the nut onto the tube. don't let the tube slide out of the nut or
you'll be
> in for some big fun.
>
> Joel
>
> ----- Original Message -----
> From: <cadman@p...>
> To: <CAD_CAM_EDM_DRO@y...>
> Sent: Wednesday, June 06, 2001 11:32 AM
> Subject: [CAD_CAM_EDM_DRO] Assembly of ballnut on screw & Screw
quality.
>
>
> Has
> > anyone got experience putting the nut on the screw without loosing
> > the balls? Also if I wanted to remove the nut would I just
reverse
> > the process?
> >
> > Thanks
> >
> > CADMAN

Discussion Thread

cadman@p... 2001-06-06 08:33:34 UTC Assembly of ballnut on screw & Screw quality. Joel Jacobs 2001-06-06 08:46:25 UTC Re: [CAD_CAM_EDM_DRO] Assembly of ballnut on screw & Screw quality. Tim Goldstein 2001-06-06 08:51:39 UTC RE: [CAD_CAM_EDM_DRO] Assembly of ballnut on screw & Screw quality. Larry Van Duyn 2001-06-06 08:58:57 UTC Re: [CAD_CAM_EDM_DRO] Assembly of ballnut on screw & Screw quality. cadman@p... 2001-06-06 09:07:46 UTC Re: Assembly of ballnut on screw & Screw quality. Joel Jacobs 2001-06-06 09:27:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Assembly of ballnut on screw & Screw quality. Chris Stratton 2001-06-06 14:53:06 UTC Re: [CAD_CAM_EDM_DRO] Re: Assembly of ballnut on screw & Screw quality. Drew Rogge 2001-06-06 15:00:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Assembly of ballnut on screw & Screw quality. ballendo@y... 2001-06-06 17:00:45 UTC Re: Assembly of ballnut on screw & Screw quality. ballendo@y... 2001-06-06 17:15:20 UTC Re: Assembly of ballnut on screw & Screw quality. Sven Peter, TAD S.A. 2001-06-06 20:20:22 UTC Re: [CAD_CAM_EDM_DRO] Re: Assembly of ballnut on screw & Screw quality.