Re: Assembly of ballnut on screw & Screw quality.

Hi,

It's a good idea to spread out a large towel and a sheet under that,
when you do this. That way, If the worst "big fun" should happen, at
least you'll have all the parts...

Hope this helps.

Ballendo

--- In CAD_CAM_EDM_DRO@y..., "Joel Jacobs" <jj@n...> wrote:
> Yes, just butt the tube up to the end of the screw and turn the nut
onto the
> screw. To remove the nut hold the tube up to the end of the screw
and turn
> the nut onto the tube. don't let the tube slide out of the nut or
you'll be
> in for some big fun.
>
> Joel
>
> ----- Original Message -----
> From: <cadman@p...>
> To: <CAD_CAM_EDM_DRO@y...>
> Sent: Wednesday, June 06, 2001 11:32 AM
> Subject: [CAD_CAM_EDM_DRO] Assembly of ballnut on screw & Screw
quality.
>
>
> Has
> > anyone got experience putting the nut on the screw without loosing
> > the balls? Also if I wanted to remove the nut would I just
reverse
> > the process?
> >
> > Thanks
> >
> > CADMAN