CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question

Posted by Hugh Prescott
on 2001-07-16 10:04:24 UTC
Greetings

Just looked at some Pertech 8" drives from the orig. Mits Altair and some
Siemens from old OSI computers.

They appear to have a 4 lead stepper bipolar motor for the heads running on
24 volts

The Siemens motors are made by Singer. The lable is mounted against the PCB
so I can not read it with put disassembly. The spindle motor is a 115 VAC
sync motor with cap.

Yes daughter, these were considered state of the art high density storage
when your dad got into computers.

Hugh
----- Original Message -----
From: <cadcamcenter@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, July 16, 2001 11:34 AM
Subject: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question


> Alan Trest wrote: "Anyone know what type of motors are in old 8"
> floppy drives."
>
> Jon Elson: "All sorts. I've seen AC induction motors, DC brush, DC
> brushless. Just about any kind of motor you can imagine......Without
> knowing what you want to do with it, I can't offer much help. They
> won't be of much use in a machine tool, unless it was micro-sized."
>
> Is the Unimat I (Unimat Classic) micro- enough?
>
> Peter
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

Alan Trest 2001-07-15 13:57:00 UTC 8" Floppy Drive Motor question Alan Marconett KM6VV 2001-07-15 15:40:41 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question cncdxf@a... 2001-07-15 16:49:31 UTC Re: 8" Floppy Drive Motor question Alan Trest 2001-07-15 18:02:30 UTC Re: 8" Floppy Drive Motor question Henry H. Armstrong 2001-07-15 21:18:09 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question Jon Elson 2001-07-15 22:48:17 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question Jon Elson 2001-07-15 22:56:30 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question cadcamcenter@y... 2001-07-16 09:35:18 UTC 8" Floppy Drive Motor question Hugh Prescott 2001-07-16 10:04:24 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question jguenther@v... 2001-07-16 10:18:02 UTC RE: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question JanRwl@A... 2001-07-16 10:21:24 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question JanRwl@A... 2001-07-16 10:26:09 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question Hugh Prescott 2001-07-16 10:37:53 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question Jon Elson 2001-07-16 10:48:12 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question Alan Marconett KM6VV 2001-07-16 12:28:08 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question JanRwl@A... 2001-07-16 17:57:21 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question JanRwl@A... 2001-07-16 18:25:04 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question Jon Elson 2001-07-16 22:48:43 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question Alan Marconett KM6VV 2001-07-17 12:55:05 UTC Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question