Re: 8" Floppy Drive Motor question
Posted by
cncdxf@a...
on 2001-07-15 16:49:31 UTC
Hi Alan,
Those motors will work fine for experimenting if they
have 5 or 6 wires. They only have about 30oz of torq. They
can also work in telescope or other small drive system.
Bob
Those motors will work fine for experimenting if they
have 5 or 6 wires. They only have about 30oz of torq. They
can also work in telescope or other small drive system.
Bob
--- In CAD_CAM_EDM_DRO@y..., "Alan Trest" <stickman@d...> wrote:
> Hi All,
>
> Anyone know what type of motors are in old 8" floppy drives.
> I found a dual drive unit at a Military Surplus Store, Just
> wondered if its worth harvesting the motors.
>
> All replys appreciated.
>
> Alan Trest
> Pensacola, Fl
Discussion Thread
Alan Trest
2001-07-15 13:57:00 UTC
8" Floppy Drive Motor question
Alan Marconett KM6VV
2001-07-15 15:40:41 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
cncdxf@a...
2001-07-15 16:49:31 UTC
Re: 8" Floppy Drive Motor question
Alan Trest
2001-07-15 18:02:30 UTC
Re: 8" Floppy Drive Motor question
Henry H. Armstrong
2001-07-15 21:18:09 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
Jon Elson
2001-07-15 22:48:17 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
Jon Elson
2001-07-15 22:56:30 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
cadcamcenter@y...
2001-07-16 09:35:18 UTC
8" Floppy Drive Motor question
Hugh Prescott
2001-07-16 10:04:24 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
jguenther@v...
2001-07-16 10:18:02 UTC
RE: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
JanRwl@A...
2001-07-16 10:21:24 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
JanRwl@A...
2001-07-16 10:26:09 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
Hugh Prescott
2001-07-16 10:37:53 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
Jon Elson
2001-07-16 10:48:12 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
Alan Marconett KM6VV
2001-07-16 12:28:08 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
JanRwl@A...
2001-07-16 17:57:21 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
JanRwl@A...
2001-07-16 18:25:04 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
Jon Elson
2001-07-16 22:48:43 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question
Alan Marconett KM6VV
2001-07-17 12:55:05 UTC
Re: [CAD_CAM_EDM_DRO] 8" Floppy Drive Motor question