CAD CAM EDM DRO - Yahoo Group Archive

Re: using a CNC mill to engrave metal

Posted by ym_wong@p...
on 2001-08-17 04:12:48 UTC
--- In CAD_CAM_EDM_DRO@y..., rab@r... wrote:
> I converted the mill from manual to cnc using parts from Taig, but
> the X leadscrew was meant for a model with a longer table.
> I also put a 2" spacer block between the Z column and the mill base.
>
> Rab

I have a 12-in travel version, the 2019CR, but would be very
interested in have a few more inches of travel on the x-axis. With
that long screw, did you have any problem using the left side of the
base?

Regards,
ym

Discussion Thread

david albert 2001-08-13 12:47:46 UTC using a CNC mill to engrave metal Tim 2001-08-13 15:06:15 UTC RE: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Gail & Bryan Harries 2001-08-13 16:26:32 UTC RE: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Marcus & Eva 2001-08-13 19:03:50 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Jon Elson 2001-08-13 22:58:31 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Tony Jeffree 2001-08-14 00:29:32 UTC Re: using a CNC mill to engrave metal Smoke 2001-08-14 07:02:22 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal dougrasmussen@c... 2001-08-14 07:54:12 UTC Re: using a CNC mill to engrave metal dougrasmussen@c... 2001-08-14 07:54:47 UTC Re: using a CNC mill to engrave metal Smoke 2001-08-14 17:04:18 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal Marcus & Eva 2001-08-14 18:38:57 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Rich D. 2001-08-14 19:41:27 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Chris L 2001-08-14 20:30:54 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal Tony Jeffree 2001-08-14 22:03:11 UTC Re: using a CNC mill to engrave metal Smoke 2001-08-15 11:31:51 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Smoke 2001-08-15 11:34:21 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal Gail & Bryan Harries 2001-08-15 12:06:39 UTC RE: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal rab@r... 2001-08-15 16:23:54 UTC Re: using a CNC mill to engrave metal ym_wong@p... 2001-08-15 21:10:57 UTC Re: using a CNC mill to engrave metal info.host@b... 2001-08-16 00:51:47 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal Tony Jeffree 2001-08-16 03:25:09 UTC Re: using a CNC mill to engrave metal rab@r... 2001-08-16 14:07:02 UTC Re: using a CNC mill to engrave metal ym_wong@p... 2001-08-16 16:42:19 UTC Re: using a CNC mill to engrave metal rab@r... 2001-08-16 17:39:01 UTC Re: using a CNC mill to engrave metal ym_wong@p... 2001-08-16 18:28:26 UTC Re: using a CNC mill to engrave metal rab@r... 2001-08-17 02:43:54 UTC Re: using a CNC mill to engrave metal ym_wong@p... 2001-08-17 04:12:48 UTC Re: using a CNC mill to engrave metal rab@r... 2001-08-17 04:54:11 UTC Re: using a CNC mill to engrave metal M. SHABBIR MOGHUL 2001-08-18 20:02:48 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal