CAD CAM EDM DRO - Yahoo Group Archive

Re: using a CNC mill to engrave metal

Posted by rab@r...
on 2001-08-16 14:07:02 UTC
I've uploaded two files, one called "Engraving_Cutter2" and one
Collets "Collets" with show the setup I'v been recently using on
brass, silver and wood.
I also have good results on many designs using a 2mm ball-nose end
mill with 6mm shank which fits one of the Collets that came with the
router.

Rab,

--- In CAD_CAM_EDM_DRO@y..., ym_wong@p... wrote:
> --- In CAD_CAM_EDM_DRO@y..., rab@r... wrote:
> > David,
> >
> > I engrave brass and silver on my Taig mill using a cheap wood
> router
> > at 30,000 rpm along with a collet I made which takes a 1/8" V
> shaped
> > cutter.
> >
> > Rab
> >
>
> Hi Rab,
>
> Is it possible for you to show us a picture of your router and
collet
> setup. Thanks.
>
> ym

Discussion Thread

david albert 2001-08-13 12:47:46 UTC using a CNC mill to engrave metal Tim 2001-08-13 15:06:15 UTC RE: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Gail & Bryan Harries 2001-08-13 16:26:32 UTC RE: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Marcus & Eva 2001-08-13 19:03:50 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Jon Elson 2001-08-13 22:58:31 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Tony Jeffree 2001-08-14 00:29:32 UTC Re: using a CNC mill to engrave metal Smoke 2001-08-14 07:02:22 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal dougrasmussen@c... 2001-08-14 07:54:12 UTC Re: using a CNC mill to engrave metal dougrasmussen@c... 2001-08-14 07:54:47 UTC Re: using a CNC mill to engrave metal Smoke 2001-08-14 17:04:18 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal Marcus & Eva 2001-08-14 18:38:57 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Rich D. 2001-08-14 19:41:27 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Chris L 2001-08-14 20:30:54 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal Tony Jeffree 2001-08-14 22:03:11 UTC Re: using a CNC mill to engrave metal Smoke 2001-08-15 11:31:51 UTC Re: [CAD_CAM_EDM_DRO] using a CNC mill to engrave metal Smoke 2001-08-15 11:34:21 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal Gail & Bryan Harries 2001-08-15 12:06:39 UTC RE: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal rab@r... 2001-08-15 16:23:54 UTC Re: using a CNC mill to engrave metal ym_wong@p... 2001-08-15 21:10:57 UTC Re: using a CNC mill to engrave metal info.host@b... 2001-08-16 00:51:47 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal Tony Jeffree 2001-08-16 03:25:09 UTC Re: using a CNC mill to engrave metal rab@r... 2001-08-16 14:07:02 UTC Re: using a CNC mill to engrave metal ym_wong@p... 2001-08-16 16:42:19 UTC Re: using a CNC mill to engrave metal rab@r... 2001-08-16 17:39:01 UTC Re: using a CNC mill to engrave metal ym_wong@p... 2001-08-16 18:28:26 UTC Re: using a CNC mill to engrave metal rab@r... 2001-08-17 02:43:54 UTC Re: using a CNC mill to engrave metal ym_wong@p... 2001-08-17 04:12:48 UTC Re: using a CNC mill to engrave metal rab@r... 2001-08-17 04:54:11 UTC Re: using a CNC mill to engrave metal M. SHABBIR MOGHUL 2001-08-18 20:02:48 UTC Re: [CAD_CAM_EDM_DRO] Re: using a CNC mill to engrave metal