RE: [CAD_CAM_EDM_DRO] Use Router for metal work
Posted by
Dan Mauch
on 2001-10-09 13:21:47 UTC
The WD 40 can says to "Keep spray away from heat, sparts, pilot lights,
open flame...
The can also says "Displaces moisture" thus I doubt that it contains any
water but probably does contain alcohol which absorbs water. I use it
after using my flood coolant system on my mill. After the visible
coolant is wiped off I coat all the machine surfaces with WD40 just to
absorb any water that may be trapped and act as a pre lube for the next
time I use the machine.
Dan
open flame...
The can also says "Displaces moisture" thus I doubt that it contains any
water but probably does contain alcohol which absorbs water. I use it
after using my flood coolant system on my mill. After the visible
coolant is wiped off I coat all the machine surfaces with WD40 just to
absorb any water that may be trapped and act as a pre lube for the next
time I use the machine.
Dan
Discussion Thread
Niyom Racharin
2001-10-08 23:43:59 UTC
Use Router for metal work
Doug Fortune
2001-10-09 00:36:31 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Eric Keller
2001-10-09 04:53:39 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Les Newell
2001-10-09 05:02:37 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Jon Elson
2001-10-09 11:01:29 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Brian Walsh
2001-10-09 11:56:39 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Ethan Vos
2001-10-09 12:08:33 UTC
RE: [CAD_CAM_EDM_DRO] Use Router for metal work
Tim
2001-10-09 12:29:32 UTC
RE: [CAD_CAM_EDM_DRO] Use Router for metal work
Ethan Vos
2001-10-09 12:33:41 UTC
RE: [CAD_CAM_EDM_DRO] Use Router for metal work
Carey L. Culpepper
2001-10-09 12:48:41 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Dan Mauch
2001-10-09 13:21:47 UTC
RE: [CAD_CAM_EDM_DRO] Use Router for metal work
William Scalione
2001-10-09 15:11:38 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Ron Yost
2001-10-09 15:17:50 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Jerry Kimberlin
2001-10-09 19:52:27 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Brian Walsh
2001-10-09 20:55:13 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
David Goodfellow
2001-10-09 21:02:37 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Tim Goldstein
2001-10-09 21:08:16 UTC
RE: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work
Brian Walsh
2001-10-09 21:14:06 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Jerry Kimberlin
2001-10-09 21:14:48 UTC
Re: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work
Jerry Kimberlin
2001-10-09 21:17:53 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Tim Goldstein
2001-10-09 21:32:39 UTC
RE: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work
M. SHABBIR MOGHUL
2001-10-09 21:34:20 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Brian Walsh
2001-10-09 21:36:12 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
Jerry Kimberlin
2001-10-09 21:55:01 UTC
Re: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work
Carol & Jerry Jankura
2001-10-10 05:39:11 UTC
RE: [CAD_CAM_EDM_DRO] Use Router for metal work
Smoke
2001-10-10 06:29:28 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work
johnhe
2001-10-10 07:32:23 UTC
Re: [CAD_CAM_EDM_DRO] Use Router for metal work