CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Use Router for metal work

Posted by Brian Walsh
on 2001-10-09 20:55:13 UTC
Now there's a thing! What does the 40 stand for?

Brian Walsh
Glasgow
Scotland

----- Original Message -----
From: "William Scalione" <wscalione@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, October 10, 2001 12:15
Subject: Re: [CAD_CAM_EDM_DRO] Use Router for metal work


> > The can also says "Displaces moisture"
>
> Hence the name WD 40. the WD stands for "Water Displacement"
>
> Bill
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

Niyom Racharin 2001-10-08 23:43:59 UTC Use Router for metal work Doug Fortune 2001-10-09 00:36:31 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Eric Keller 2001-10-09 04:53:39 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Les Newell 2001-10-09 05:02:37 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Jon Elson 2001-10-09 11:01:29 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Brian Walsh 2001-10-09 11:56:39 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Ethan Vos 2001-10-09 12:08:33 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work Tim 2001-10-09 12:29:32 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work Ethan Vos 2001-10-09 12:33:41 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work Carey L. Culpepper 2001-10-09 12:48:41 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Dan Mauch 2001-10-09 13:21:47 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work William Scalione 2001-10-09 15:11:38 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Ron Yost 2001-10-09 15:17:50 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Jerry Kimberlin 2001-10-09 19:52:27 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Brian Walsh 2001-10-09 20:55:13 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work David Goodfellow 2001-10-09 21:02:37 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Tim Goldstein 2001-10-09 21:08:16 UTC RE: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work Brian Walsh 2001-10-09 21:14:06 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Jerry Kimberlin 2001-10-09 21:14:48 UTC Re: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work Jerry Kimberlin 2001-10-09 21:17:53 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Tim Goldstein 2001-10-09 21:32:39 UTC RE: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work M. SHABBIR MOGHUL 2001-10-09 21:34:20 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Brian Walsh 2001-10-09 21:36:12 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Jerry Kimberlin 2001-10-09 21:55:01 UTC Re: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work Carol & Jerry Jankura 2001-10-10 05:39:11 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work Smoke 2001-10-10 06:29:28 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work johnhe 2001-10-10 07:32:23 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work