Re: [CAD_CAM_EDM_DRO] Software for Lathe
Posted by
Tim Goldstein
on 2001-10-18 07:15:48 UTC
Vector ( http://www.imsrv.com/ ) does a nice job on lathe code. Has a lathe
cycle (OK so it is located in the pocket group on the menu) that generates
both the roughing and finish tool path for the part. Sort of wonder about
your desire to see the part in 3-D? I draw my lathe parts as a flat 2-D
curve and then let Vector handle the cuts. Never rotate the single curve to
create a 3-D item although Vector is certainly capable of doing that.
Don't forget that Fred has a special page with heavy discounts on Vector and
other products for us CAD_CAM list folks.
Tim
[Denver, CO]
-----Original Message-----
cycle (OK so it is located in the pocket group on the menu) that generates
both the roughing and finish tool path for the part. Sort of wonder about
your desire to see the part in 3-D? I draw my lathe parts as a flat 2-D
curve and then let Vector handle the cuts. Never rotate the single curve to
create a 3-D item although Vector is certainly capable of doing that.
Don't forget that Fred has a special page with heavy discounts on Vector and
other products for us CAD_CAM list folks.
Tim
[Denver, CO]
-----Original Message-----
>I'm looking for a software package that will allow me to design
>custom knobs and feet (for small wooden boxes my wife builds) using
>my MaxNC CNC lathe. I'd like to be able to view the design in 3D and
>then generate the G-Code required to cut it.
>
>Any recommendations?
>
>Thanks,
>Rob
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Discussion Thread
Rob
2001-10-18 00:36:31 UTC
Software for Lathe
bhagavan
2001-10-18 04:19:14 UTC
Re: [CAD_CAM_EDM_DRO] Software for Lathe
Tim Goldstein
2001-10-18 07:15:48 UTC
Re: [CAD_CAM_EDM_DRO] Software for Lathe
Jon Elson
2001-10-18 11:15:12 UTC
Re: [CAD_CAM_EDM_DRO] Software for Lathe
Tim
2001-10-18 11:47:51 UTC
RE: [CAD_CAM_EDM_DRO] Software for Lathe
machines@n...
2001-10-18 15:46:47 UTC
Re: Software for Lathe
glee@i...
2001-10-19 00:19:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
Michael Milligan
2001-10-19 00:47:09 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software for Lathe
bhagavan
2001-10-19 03:22:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
bhagavan
2001-10-19 03:28:21 UTC
[CAD_CAM_EDM_DRO] Re: Software for Lathe
machines@n...
2001-10-19 04:12:10 UTC
Re: Software for Lathe
bhagavan
2001-10-19 05:06:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
machines@n...
2001-10-19 12:54:43 UTC
Re: Software for Lathe
bhagavan
2001-10-22 03:32:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
machines@n...
2001-10-22 04:42:17 UTC
Re: Software for Lathe
bhagavan
2001-10-22 05:25:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
support@c...
2001-10-22 07:12:43 UTC
Re: Software for Lathe
machines@n...
2001-10-22 07:49:03 UTC
Re: Software for Lathe
bhagavan
2001-10-22 23:14:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
Rob
2001-10-23 00:29:58 UTC
Re: Software for Lathe
machines@n...
2001-10-23 01:20:54 UTC
Re: Software for Lathe
Fred Smith
2001-10-23 03:09:54 UTC
Re: Software for Lathe
Carol & Jerry Jankura
2001-10-26 16:01:12 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software for Lathe
Rob
2001-10-26 16:36:51 UTC
Re: Software for Lathe