Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe

John S. Wrote:

> For something this simple there are quite a few packages out there
> but beware a lot of so called lathe packages are no more than 2 axis
> spin off's from milling packages.
> To be called a proper lathe package they need to be able to groove,
> rough turn, finish turn, part off, screwcut and be able to handle tip
> off set correctly.
>
> John S.

John, since you have been so specific on requirements for Lathe cutting CNC
Software (for which I thank you) do you know if Dolphin or Vector provide
some of all of these functions?

FEATURE DOLPHIN VECTOR OTHER??
-------------- ------------ -------- ---------
Groove
Rough turn
Finish turn
Part off
Screwcut
Handle tip off set correctly.






machines@ntlwo
rld.com To: CAD_CAM_EDM_DRO@yahoogroups.com
cc:
10/18/2001 Fax to:
03:46 PM Subject: [CAD_CAM_EDM_DRO] Re: Software for Lathe
Please respond
to
CAD_CAM_EDM_DR
O

--- In CAD_CAM_EDM_DRO@y..., "Rob" <robv@s...> wrote:
> I'm looking for a software package that will allow me to design
> custom knobs and feet (for small wooden boxes my wife builds) using
> my MaxNC CNC lathe. I'd like to be able to view the design in 3D
>and
> then generate the G-Code required to cut it.
>
> Any recommendations?
>
> Thanks,
> Rob




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/