Re: Software for Lathe
Posted by
Rob
on 2001-10-26 16:36:51 UTC
I did enjoy CapsTURN but I finally decided to go with OneCNC Mill &
Lathe software. OneCNC Lathe was on special this week and was being
sold for $1000. Their manual is excellent and has numerous tutorials.
So my choice for mill & lathe software are:
Mill - OneCNC for parts - Cimagrafi for engraving, etc.
Lathe - OneCNC
I evaluated just about every software package under the sun that had
a demo version. OneCNC was one of the easiest and nicest looking
(they used many Microsoft Windows application standards).
Just my 2 cents.
Rob
--- In CAD_CAM_EDM_DRO@y..., "Carol & Jerry Jankura"
<jerry.jankura@s...> wrote:
Lathe software. OneCNC Lathe was on special this week and was being
sold for $1000. Their manual is excellent and has numerous tutorials.
So my choice for mill & lathe software are:
Mill - OneCNC for parts - Cimagrafi for engraving, etc.
Lathe - OneCNC
I evaluated just about every software package under the sun that had
a demo version. OneCNC was one of the easiest and nicest looking
(they used many Microsoft Windows application standards).
Just my 2 cents.
Rob
--- In CAD_CAM_EDM_DRO@y..., "Carol & Jerry Jankura"
<jerry.jankura@s...> wrote:
>$3500 + by
>
> | -----Original Message-----
> | From: bhagavan [mailto:skbhagavan@v...]
> | Sent: Monday, October 22, 2001 3:41 AM
> | To: CAD_CAM_EDM_DRO@y...
> | Subject: Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
> |
> |
> |
> | $2000 for capsturn sound pretty resonable to me...considering
> | what it seems
> | to be capable of. For similar functionality I've been quoted
> | other CAM vendors.it comes
> |
> | Email support is good enough..how does it matter which country
> | from..it should be prompt and in English.Jinglisn,
>
> Apparently you've never attempted to read manuals written in
> Chinglish, Hinglish, etc. No offence meant to the folks for whomEnglish is
> a second language (especially, since it's my ONLY language) butattempting
> to make sense from some translations is quite difficult. And, it'salso
> difficult to sometimes understand things written in differentdialects of
> English, let alone a different language.prefer to
>
> | Yes, I can understand some old timers ( like my boss he's 65+ )
> | have the comfort of speaking to a human for support and areunable to work
> | with email support.quickly
> At its best, E-Mail can involve several turn-arounds that could be
> dispensed of with person-to-person contact. At its worst, E-Mailcan be a
> black hole into which you dump electrons and never receive anysatisfaction.
> I'll take voice support any day of the week.
Discussion Thread
Rob
2001-10-18 00:36:31 UTC
Software for Lathe
bhagavan
2001-10-18 04:19:14 UTC
Re: [CAD_CAM_EDM_DRO] Software for Lathe
Tim Goldstein
2001-10-18 07:15:48 UTC
Re: [CAD_CAM_EDM_DRO] Software for Lathe
Jon Elson
2001-10-18 11:15:12 UTC
Re: [CAD_CAM_EDM_DRO] Software for Lathe
Tim
2001-10-18 11:47:51 UTC
RE: [CAD_CAM_EDM_DRO] Software for Lathe
machines@n...
2001-10-18 15:46:47 UTC
Re: Software for Lathe
glee@i...
2001-10-19 00:19:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
Michael Milligan
2001-10-19 00:47:09 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software for Lathe
bhagavan
2001-10-19 03:22:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
bhagavan
2001-10-19 03:28:21 UTC
[CAD_CAM_EDM_DRO] Re: Software for Lathe
machines@n...
2001-10-19 04:12:10 UTC
Re: Software for Lathe
bhagavan
2001-10-19 05:06:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
machines@n...
2001-10-19 12:54:43 UTC
Re: Software for Lathe
bhagavan
2001-10-22 03:32:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
machines@n...
2001-10-22 04:42:17 UTC
Re: Software for Lathe
bhagavan
2001-10-22 05:25:35 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
support@c...
2001-10-22 07:12:43 UTC
Re: Software for Lathe
machines@n...
2001-10-22 07:49:03 UTC
Re: Software for Lathe
bhagavan
2001-10-22 23:14:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe
Rob
2001-10-23 00:29:58 UTC
Re: Software for Lathe
machines@n...
2001-10-23 01:20:54 UTC
Re: Software for Lathe
Fred Smith
2001-10-23 03:09:54 UTC
Re: Software for Lathe
Carol & Jerry Jankura
2001-10-26 16:01:12 UTC
RE: [CAD_CAM_EDM_DRO] Re: Software for Lathe
Rob
2001-10-26 16:36:51 UTC
Re: Software for Lathe