RE: [CAD_CAM_EDM_DRO] Re: Software for Lathe

Eric

I don't know aout Vector but Dolphin will handle all items
listed plus many more and has been designed to take into account the
Geometry
of the different types of tools used in turning applications.

michael

-----Original Message-----
From: emack@... [mailto:emack@...]On Behalf Of glee@...
Sent: 19 October 2001 08:16
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re: Software for Lathe



John S. Wrote:

> For something this simple there are quite a few packages out there
> but beware a lot of so called lathe packages are no more than 2 axis
> spin off's from milling packages.
> To be called a proper lathe package they need to be able to groove,
> rough turn, finish turn, part off, screwcut and be able to handle tip
> off set correctly.
>
> John S.

John, since you have been so specific on requirements for Lathe cutting CNC
Software (for which I thank you) do you know if Dolphin or Vector provide
some of all of these functions?

FEATURE DOLPHIN VECTOR OTHER??
-------------- ------------ -------- ---------
Groove
Rough turn
Finish turn
Part off
Screwcut
Handle tip off set correctly.






machines@ntlwo
rld.com To:
CAD_CAM_EDM_DRO@yahoogroups.com
cc:
10/18/2001 Fax to:
03:46 PM Subject: [CAD_CAM_EDM_DRO] Re:
Software for Lathe
Please respond
to
CAD_CAM_EDM_DR
O

--- In CAD_CAM_EDM_DRO@y..., "Rob" <robv@s...> wrote:
> I'm looking for a software package that will allow me to design
> custom knobs and feet (for small wooden boxes my wife builds) using
> my MaxNC CNC lathe. I'd like to be able to view the design in 3D
>and
> then generate the G-Code required to cut it.
>
> Any recommendations?
>
> Thanks,
> Rob




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/







Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/