Re: Re: 2.5 axis vs. 3 axis

> Date: Thu, 06 Dec 2001 02:39:44 -0000
> From: "yethdear0" <yethdear@...>
>Subject: Re: 2.5 axis vs. 3 axis
>
>Wow!
>
>I must have received 20 messages about this "dome" thing today. My
>intent was for you fellow techno nerds out there to try and construct
>the dome geometry using your current CAM software. This will let you
>know if your software has the whoopee to do full and true 3D.

The following link has a 3D program that is downloadable and also a
good test for the 3D capability of your controller. It was used at the
last NAMES for comparing contouring between several brands of
controllers and machines.

http://www.vectorcam.com/names

Those that have Vector will find 6 different methods of constructing unique
toolpaths for cutting a hemispherical/domed shape. Look for the "More
than one way to skin a cat" section, in the manual.

Best Regards, Fred Smith- IMService
Listserve Special discounts and offers are at: http://209.69.202.197/cced.html