CAD CAM EDM DRO - Yahoo Group Archive

Re: Excaliburcnc by XCAM

Posted by tauseef
on 2001-11-14 23:08:45 UTC
hey guys,
thanks for the interesting posts.
Chris for 2D I have used Ace Converter with much sucess. Its free and
you can use it forever..www.yeagerautomation.com. I however now will
use flashcut www.flashcut.com for my g-code 2D conversion as I can
put in a different feedrate (plunge rate) for the Z axis and XY axis,
a huge improvement over Ace in my opinion. But "there" free so there
both GREAT!

later
tauseef



--- In CAD_CAM_EDM_DRO@y..., rab@r... wrote:
> You could also check out GMAX at
> http://www.discreet.com/products/gmax/
> , which is a free, but very limited version of 3D Studio MAX. I've
> written some scripted functions for G-Code I/O and toolpath
> generation for 3D Studio MAX which I use along with Master5 CNC and
a
> converted Taig mill.
> These scripts mostly also work with GMAX if you want to try them,
but
> I'm afraid that GMAX can't make use of the Active-X control that
> Art's got for Master5.
> There's also a script for DXF import to GMAX at
> http://gmax.digitalarenas.com
> You can't import an STL file, but it should be possible to write a
> script for that.
>
> Rab,
>
> http://www.rainnea.com/cnc.htm
>
> http://www.rainnea.com/maxscript.htm

Discussion Thread

tauseef 2001-11-12 01:41:32 UTC Excaliburcnc by XCAM Andrew Werby 2001-11-12 11:55:45 UTC Re: Excaliburcnc by XCAM Carol & Jerry Jankura 2001-11-12 12:47:52 UTC RE: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM tauseef 2001-11-12 19:49:14 UTC Re: Excaliburcnc by XCAM Chris Reynolds 2001-11-13 06:10:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM allan_r9@h... 2001-11-13 06:57:06 UTC Re: Excaliburcnc by XCAM Chris Reynolds 2001-11-13 06:59:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM ppump11578@a... 2001-11-13 11:47:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Bob Campbell 2001-11-13 12:16:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM ppump11578@a... 2001-11-13 12:34:07 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Chris L 2001-11-13 18:28:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Andrew Werby 2001-11-13 18:36:09 UTC Re: Excaliburcnc by XCAM Alan Marconett KM6VV 2001-11-13 22:26:55 UTC Re: Excaliburcnc by XCAM Al Schoepp 2001-11-14 02:41:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Chris L 2001-11-14 04:55:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Chris Reynolds 2001-11-14 08:03:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Smoke 2001-11-14 08:11:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Chris Reynolds 2001-11-14 08:12:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Chris Reynolds 2001-11-14 08:14:25 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Chris Reynolds 2001-11-14 08:16:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Alan Marconett KM6VV 2001-11-14 11:46:37 UTC Re: Excaliburcnc by XCAM Fred Smith 2001-11-14 15:57:49 UTC Re: Stlwork, was Excaliburcnc by XCAM rab@r... 2001-11-14 17:01:11 UTC Re: Excaliburcnc by XCAM tauseef 2001-11-14 23:08:45 UTC Re: Excaliburcnc by XCAM John Craddock 2001-11-15 02:44:32 UTC RE: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM CL 2001-11-15 05:54:55 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Smoke 2001-11-15 06:55:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Jon Anderson 2001-11-15 07:46:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM CL 2001-11-15 08:21:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Chris Reynolds 2001-11-15 08:50:16 UTC Re: [CAD_CAM_EDM_DRO] Re: Stlwork, was Excaliburcnc by XCAM Chris Reynolds 2001-11-15 08:51:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Chris Reynolds 2001-11-15 09:02:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Chris Reynolds 2001-11-15 09:12:29 UTC Re: [CAD_CAM_EDM_DRO] Re: Excaliburcnc by XCAM Fred Smith 2001-11-15 15:06:15 UTC Re: Stlwork, was Excaliburcnc by XCAM