Re: [CAD_CAM_EDM_DRO] Re: Stainless tubing/gun drill

Obviously don't know what I'm talking about. When I thought about it, it's
plain that you are correct and the straightness of the barrel has little to
do with it. Its the line of sight / line of bullet departure that controls
whether the bullet hits the target.
Sorry and bow to your greater knowledge, grovel grovel....

----- Original Message -----
From: "Ted Walls" <tiffyted@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, January 09, 2002 11:01 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Stainless tubing/gun drill


> Hi Smoke,
>
> I think your assertion is only correct as long as the range to the target
is
> also constant. I believe if the barrel is bent say to the left and the
rifle
> is zeroed in to be accurate at 100 yds it will shoot left at greater
ranges.
> If its bent up or down the range scale on the sights will be inaccurate at
> greater ranges.
>
>
> >
> > <snip>At any rate, I might like to point out (as we learned in
> school)...what
> > difference does a minor amount of non-straightness cause? None! > FAQ:
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>