Re: [CAD_CAM_EDM_DRO] Re: Cirular interpolation

----- Original Message -----
From: "stevenson_engineers" <machines@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, January 30, 2002 7:46 PM
Subject: [CAD_CAM_EDM_DRO] Re: Cirular interpolation


> >--- In CAD_CAM_EDM_DRO@y..., "Tony Dickson" <antson@c...> wrote:
> > Folks,
> > I'm having a heck of a time trying to get my milling machine
> >thread a 4.500" hole with an 8 tpi thread in it. Can anyone tell me
> >if Bobcad, Vectorcad or Dolphin can generate code for this
> >particular operation. I think it might also be called helical
> >interpolation, I'm not sure.
> > I got in on the end of the "thread milling" post a while back, I
> >hope I'm not repeating the same question.
> >
> > Thanks,
>
> Tony
> It would help if you let us know what controller is on your machine
> and also the depth of the thread.
>
> John S.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>