Re: [CAD_CAM_EDM_DRO] Re: Cirular interpolation

Its the only control I have ever owned, but I have had NO problems with it
at all. I am however building a servo system. I will move the stepper system
to a lathe when the servo is done. I have 650 in/oz steppers and does fine
on a Bridgeport clone.

Tony

----- Original Message -----
From: "methadras" <aymani@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, January 31, 2002 7:49 PM
Subject: [CAD_CAM_EDM_DRO] Re: Cirular interpolation


> tony,
>
> how do you like the AHHA system... do you think their stuff is worth
> the money...?
>
> > John,
> > Sorry I did forget that piece of information. I am using an AHHA!
> system.
> > Hope that helps.
> >
> > Thanks,
> > Tony
> >
> > ----- Original Message -----
> > From: "stevenson_engineers" <machines@n...>
> > To: <CAD_CAM_EDM_DRO@y...>
> > Sent: Wednesday, January 30, 2002 7:46 PM
> > Subject: [CAD_CAM_EDM_DRO] Re: Cirular interpolation
> >
> >
> > > >--- In CAD_CAM_EDM_DRO@y..., "Tony Dickson" <antson@c...> wrote:
> > > > Folks,
> > > > I'm having a heck of a time trying to get my milling machine
> > > >thread a 4.500" hole with an 8 tpi thread in it. Can anyone tell
> me
> > > >if Bobcad, Vectorcad or Dolphin can generate code for this
> > > >particular operation. I think it might also be called helical
> > > >interpolation, I'm not sure.
> > > > I got in on the end of the "thread milling" post a while
> back, I
> > > >hope I'm not repeating the same question.
> > > >
> > > > Thanks,
> > >
> > > Tony
> > > It would help if you let us know what controller is on your
> machine
> > > and also the depth of the thread.
> > >
> > > John S.
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > Post messages: CAD_CAM_EDM_DRO@y...
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Manager
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>