Ah-Ha! was Re: Cirular interpolation

Methadras,

Yes, the ahHa! system is worth the money, IF you are controlling
machines which have/need a plc. As John sez, the macro language and
command builder (conversational) are a big part of what sets it apart.
VERY configurable setup.

The CVV was not real good last ver. I had. There is a yahoo ahha
group. The main guy at ahha, Richard Hager is the list owner.
Actually the list was started by John S, and handed over to Richard
Later...

It is curently beyond the "hobby" level in most ways, including price
for many. But others are catching up.

Hope this helps.

Ballendo

--- In CAD_CAM_EDM_DRO@y..., "methadras" <aymani@a...> wrote:
> tony,
>
> how do you like the AHHA system... do you think their stuff is
worth
> the money...?
>
> > John,
> > Sorry I did forget that piece of information. I am using an
AHHA!
> system.
> > Hope that helps.
> >
> > Thanks,
> > Tony
> >
> > ----- Original Message -----
> > From: "stevenson_engineers" <machines@n...>
> > To: <CAD_CAM_EDM_DRO@y...>
> > Sent: Wednesday, January 30, 2002 7:46 PM
> > Subject: [CAD_CAM_EDM_DRO] Re: Cirular interpolation
> >
> >
> > > >--- In CAD_CAM_EDM_DRO@y..., "Tony Dickson" <antson@c...>
wrote:
> > > > Folks,
> > > > I'm having a heck of a time trying to get my milling
machine
> > > >thread a 4.500" hole with an 8 tpi thread in it. Can anyone
tell
> me
> > > >if Bobcad, Vectorcad or Dolphin can generate code for this
> > > >particular operation. I think it might also be called helical
> > > >interpolation, I'm not sure.
> > > > I got in on the end of the "thread milling" post a while
> back, I
> > > >hope I'm not repeating the same question.
> > > >
> > > > Thanks,
> > >
> > > Tony
> > > It would help if you let us know what controller is on your
> machine
> > > and also the depth of the thread.
> > >
> > > John S.
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > Post messages: CAD_CAM_EDM_DRO@y...
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Manager
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >