Re: [CAD_CAM_EDM_DRO] Re: Cirular interpolation

----- Original Message -----
From: "stevenson_engineers" <machines@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, February 13, 2002 3:57 AM
Subject: [CAD_CAM_EDM_DRO] Re: Cirular interpolation


> >--- In CAD_CAM_EDM_DRO@y..., "antson20022" <antson@c...> wrote:
> >
> > Mr. Pearson,
> > I was wondering if you still might be interested in helping me
> > with my Dolphin and circular interpolation problem?
> >
> > Thanks, Tony
>
> Tony,
> With you using the AHHA controller as I mentioned before this can be
> done with one line of code.
> If you work out just what you need in that line it can be inserted
> anywhere in the Dolphin post by using the insert command in the CAM
> side. That's the sixth icon down on the inner left toolbar, looks
> like (-)
> If you need any more help feel free to email off list.
> You may not need this though as in an aerlier post from Mike Milligan
> they are putting a direct threadmilling command in the next free
> upgrade.
>
> John S.
> >
> >
> > --- In CAD_CAM_EDM_DRO@y..., "follicely_challenged"
> > ote:
> > > Tony,
> > >
> > > While the Dolphin system does not directly support thread
> milling,
> > I
> > > have achieved it by 'using' one of the drilling cycles and
> > the 'post
> > > processor' functions in the Dolphin CAM system.
> > > It works really well no matter how many threaded holes you want
> to
> > > produce.
> > > I have only done this for the Heidenhain control so far, but if
> you
> > > were thinking of going down the Dolphin route I would be happy to
> > > assist you in the post processor modifications required for a
> > > different controller.
> > > For more info on the Dolphin system go to http://www.dolphin-
> > > systems.co.uk/
> > >
> > > HTH
> >
> >
> >
> > Tony
> > >
> > > Dave Pearson
> > >
> > > --- In CAD_CAM_EDM_DRO@y..., "Tony Dickson" <antson@c...> wrote:
> > > > Folks,
> > > > I'm having a heck of a time trying to get my milling machine
> > > thread a 4.500" hole with an 8 tpi thread in it. Can anyone tell
> me
> > > if Bobcad, Vectorcad or Dolphin can generate code for this
> > > particular operation. I think it might also be called helical
> > > interpolation, I'm not sure.
> > > > I got in on the end of the "thread milling" post a while
> back,
> > I
> > > hope I'm not repeating the same question.
> > > >
> > > > Thanks,
> > > > Tony
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>