Re: [CAD_CAM_EDM_DRO] Teach-in was Re: Walk Thru Programing

Indexer LPT also has the capability to "learn" and "store" locations by
reading its current location when paused and then storing it to a text file.
Typically you can put a probe in the spindle and move to locations until it
"trips". Once tripped, the "automatic" write procedure is accomplished. At
least to my understanding of the manual. Programming examples are given there

However, the Motion Software has the capability, But, You would need to be a
programmer to use it. The current interfaces for it, do not implement the
feature.

Strange.....But True !

Chris L

ballendo wrote:

> Dennis,
>
> What you are asking for is called "teach-in". Dancad/CAM provides it
> in its shareware package at www.metalworking.com
>
> Hope this helps.
>
> Ballendo
>
> --- In CAD_CAM_EDM_DRO@y..., "dcsaws" <dcook@r...> wrote:
> > I am looking for a walk thru programing program. This would be a
> > program that I could physicality take the machine thru the motions
> > that I want the machine to do. It would copy these movements to
> disk.
> > Then I could run the program from disk and make the same parts as
> > many times as I want. Can anyone help me with this? Thank You Dennis
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/