Re: [CAD_CAM_EDM_DRO] Re: Fanuc 6T controller picture posted
Posted by
Brian Pitt
on 2002-02-12 21:20:51 UTC
many of the newer machines have both sets of controls
( keeps everyone happy right... )
six or eight jog buttons (+-XYZ,A) and the handwheel with either
its own axis select widget (knob or buttons) or using the last axis
selected with the jog buttons (tap to select ,hold down to jog )
Brian
( keeps everyone happy right... )
six or eight jog buttons (+-XYZ,A) and the handwheel with either
its own axis select widget (knob or buttons) or using the last axis
selected with the jog buttons (tap to select ,hold down to jog )
Brian
> This is one place I think the PC keyboard controls are actually BETTER
> than the CNC machines. Having to select the axis and then select the
> direction button led to a LOT more unintended motions than having a
> separate button for each axis and direction. I would rather NOT go
> back to that method. I have a mostly working AB 7320 that I used with my
> Bridgeport for about 6 months before EMC was ready.
>
> Jon
Discussion Thread
IMService
2002-02-12 06:00:54 UTC
Fanuc 6T controller picture posted
Alan Marconett KM6VV
2002-02-12 12:59:28 UTC
Re: [CAD_CAM_EDM_DRO] Fanuc 6T controller picture posted
hllrsr@c...
2002-02-12 14:10:14 UTC
Re: [CAD_CAM_EDM_DRO] Fanuc 6T controller picture posted
Wally Daniels
2002-02-12 14:51:09 UTC
Re: [CAD_CAM_EDM_DRO] Fanuc 6T controller picture posted
imserv1
2002-02-12 16:01:18 UTC
Re: Fanuc 6T controller picture posted
Alan Marconett KM6VV
2002-02-12 16:18:06 UTC
Re: Fanuc 6T controller picture posted
Jon Elson
2002-02-12 20:31:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fanuc 6T controller picture posted
Chris L
2002-02-12 20:51:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fanuc 6T controller picture posted
Brian Pitt
2002-02-12 21:20:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fanuc 6T controller picture posted
imserv1
2002-02-12 22:06:33 UTC
Re: Fanuc 6T controller picture posted
Jon Elson
2002-02-12 22:19:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fanuc 6T controller picture posted
Alan Marconett KM6VV
2002-02-12 22:23:26 UTC
Re: Fanuc 6T controller picture posted
CL
2002-02-13 06:07:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fanuc 6T controller picture posted
Alex Canale
2002-02-13 08:20:52 UTC
RE: [CAD_CAM_EDM_DRO] Maxnc Spindle RPM
Alan Marconett KM6VV
2002-02-13 10:49:32 UTC
Re: Fanuc 6T controller picture posted
Andrew Werby
2002-02-13 11:57:28 UTC
RE: Maxnc Spindle RPM
hllrsr@c...
2002-02-13 14:33:00 UTC
Re: [CAD_CAM_EDM_DRO] Fanuc 6T controller picture posted
Chris L
2002-02-13 15:52:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fanuc 6T controller picture posted
ballendo
2002-02-14 02:30:59 UTC
keyboard jog thoughts was Re: Fanuc 6T controller picture posted
Alex Canale
2002-02-14 06:53:02 UTC
RE: [CAD_CAM_EDM_DRO] RE: Maxnc Spindle RPM